HYDRAcap-80

Summary

Product identification

• Product Name: HYDRAcap80 Capillary Ultrafiltration Module
• Configuration: Capillary Ultrafiltration Module
• Membrane Polymer: Hydrophilic Polyethersulfone
• Nominal MWCO: 150,000 Daltons
• Nominal Membrane Area: 670 ft² (62.2 m²)
• Fiber Dimensions: ID 0.031” (0.8 mm), OD 0.055” (1.4 mm)
• Operating Mode: Inside to Outside Filtration, Direct flow or Crossflow
• Certifications: NSF61, CA-DHS and ETV-NSF Verification

Operating limits

• Maximum Applied Feed Pressure: 73 psig (5 bar)
• Maximum Transmembrane Pressure: 20 psig (1.4 bar)
• Maximum Backwash Transmembrane Pressure: 20 psig (1.4 bar)
• Instantaneous Chlorine Tolerance: 100 ppm (for 15 minutes or less)
• Instantaneous Hydrogen Peroxide Tolerance: 200 ppm (for 15 minutes or less)
• Maximum Chlorine Exposure: 100,000 ppm-hrs
• Maximum Operating Temperature: 104 °F (40 °C)
• pH Operating Range: 4.0 - 10.0
• Cleaning pH Range: 1.5 – 13.0

Feed water

• Maximum Instantaneous Feed Turbidity: 100 NTU

Product water

• Filtrate Flow: 16.3 – 39.5 gpm (3.7 – 9.0 m³/h)
• Filtrate Turbidity: ≤ 0.07 NTU
• Virus removal: ≥ 4 log
• Bacteria removal: ≥ 4 log
• Typical Filtrate Flux Range: 35 – 85 gfd (59 – 145 l/m²/h)

Mechanical / hydraulic

• Dimensions (A, B, C):
  • A: 83” (2108 mm)
  • B: 86 1/8” (2188 mm)
  • C: 87 1/4” (2216 mm)
  • Note: Additional dimensions are provided in the official PDF diagram.
• Pipe connections: 2” Victaulic
• Weight (average shipping): 120 lbs (54 kg) (Includes 1L of a 0.95% sodium bisulfite preservative solution.)

Typical Process Conditions

• Backwash Flux: 100 – 150 gfd (170 – 255 l/m²/h)
• Backwash Duration: 30 – 60 seconds
• Backwash Frequency: 20 – 60 minutes
• Chemical Enhanced Backwash Frequency: 0 – 4 times per day
• Chemical Enhanced Backwash Duration: 1 – 30 minutes
• Disinfection Chemicals: NaOCl, H₂O₂, ClO₂ or NH₂Cl
• Cleaning Chemicals: HCl, H₂SO₄, NaOH or Citric Acid

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror