Back to UF Modules
Hydranautics logo

International brand dossier

Hydranautics UF Modules

Hydranautics is a Nitto Group membrane company with roots going back to 1963, reverse-osmosis membrane work beginning in 1970, and Nitto Denko ownership from 1987.

Brand profile and portfolio

Hydranautics is a Nitto Group membrane company with roots going back to 1963, reverse-osmosis membrane work beginning in 1970, and Nitto Denko ownership from 1987.In water-treatment procurement it is treated as a long-established membrane technology house, not just a model label: the brand is associated with RO, NF, UF, MF, and specialty membranes for desalination, reuse, high-purity water, and process separation.

Hydranautics UF Modules's position in ultrafiltration modules is defined by product families such as hollow-fiber, capillary, submerged, pressurized, and MBR-related UF membrane modules.The portfolio is best understood inside pretreatment, reuse, drinking water clarification, MBR solids separation, turbidity control, and pathogen barrier service, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.

Representative series on this page include HYDRAcap, HYDRAcap-40 and HYDRAcap-40-LD.Selection should focus on membrane material, pore size or MWCO, flux, cleaning method, module format, and skid layout.

9

Models and series

1

Product families

Model index

Quick Model Index

9 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 9 of 9 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

HYDRAcap

General Products

Maximum Feed Pressure: 73 psig (5 bar) · Transmembrane Pressure (TMP) range: 4 - 22 psig (27 - 152 kPa) · Backwash Pressure: 35 psig (242 kPa)

The HYDRAcap is an ultrafiltration module featuring capillary technology with a hydrophilic polyethersulfone membrane.

DetailsPDF

HYDRAcap-40

General Products

Filtrate Flow: 7.7 – 18.9 gpm (1.8 – 4.3 m³/h) · Nominal Membrane Area: 320 ft² (30 m²) · Pore size: 0.02 micron

The HYDRAcap-40 is a capillary ultrafiltration module utilizing hydrophilic polyethersulfone membrane for inside-to-outside filtration.

DetailsPDF

HYDRAcap-40-LD

General Products

Filtrate Flow: 5 – 12.3 gpm (1.1 – 2.8 m³/h) · Pore size: 0.02 micron · Nominal Membrane Area: 208 ft² (19.3 m²)

The HYDRAcap-40-LD is a capillary ultrafiltration module featuring a hydrophilic polyethersulfone membrane with a 0.02-micron pore size.

DetailsPDF

HYDRAcap-MAX-40

General Products

Filtrate Flow: 7.5 – 24.4 gpm (1.7 – 5.5 m³/h) · Nominal Membrane Area: 560 ft² (52 m²) · Pore size: 0.1 micron

The HYDRAcap-MAX-40 is a capillary microfiltration module with a PVDF membrane offering 560 ft² of nominal area for outside-to-inside filtration.

DetailsPDF

HYDRAcap-60

General Products

Filtrate Flow: 12.1 – 29.5 gpm (2.7 – 6.7 m³/h) · Nominal Membrane Area: 500 ft² (46 m²) · Pore size: 0.02 micron

The HYDRAcap-60 is a capillary ultrafiltration module constructed with hydrophilic polyethersulfone membrane polymer.

DetailsPDF

HYDRAcap-60-LD

General Products

Retention / pore size: 0.02 micron · Filtrate Flow: 7.8 – 19 gpm (1.8 – 4.3 m³/h) · Pore size: 0.02 micron

The HYDRAcap-60-LD is a capillary ultrafiltration module utilizing a hydrophilic polyethersulfone membrane with a 0.02 micron pore size.

DetailsPDF

HYDRAcap-MAX-60

General Products

Filtrate Flow: 11.7 – 37.9 gpm (2.7 – 8.6 m³/h) · Nominal Membrane Area: 840 ft² (78 m²) · Pore Size: 0.1 micron

The HYDRAcap-MAX-60 is a capillary microfiltration module utilizing PVDF membrane polymer for outside-to-inside filtration.

DetailsPDF

HYDRAcap-80

General Products

Filtrate Flow: 16.3 – 39.5 gpm (3.7 – 9.0 m³/h) · Nominal Membrane Area: 670 ft² (62.2 m²) · Maximum Applied Feed Pressure: 73 psig (5 bar)

The HYDRAcap-80 is a capillary ultrafiltration module with a hydrophilic polyethersulfone membrane, suitable for inside-to-outside filtration.

DetailsPDF

HYDRAcap-MAX-80

General Products

Filtrate Flow: 15.7 – 51.0 gpm (3.6 – 11.6 m³/h) (Typical module performance for most feedwaters) · Nominal Membrane Area: 1130 ft² (105 m²) · Pore size: 0.08 micron

The HYDRAcap-MAX-80 is a capillary ultrafiltration module featuring a TIPS PVDF membrane with a nominal area of 1130 ft².

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose Hydranautics UF UF Modules

This section answers two questions: which main product families Hydranautics UF offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are General Products. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare module format, flux target, backwash strategy, and chemical tolerance. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

1 product families on this page.

General Products

9 models in this family. Representative models: HYDRAcap, HYDRAcap-40, HYDRAcap-40-LD.

Product introductions and documents

Brand Products & Technical Documents

9 models and series

View product applications, datasheets and family manuals.

General Products

9 product profiles

UF
Hydranautics logo

Product profile

HYDRAcap

The HYDRAcap is an ultrafiltration module featuring capillary technology with a hydrophilic polyethersulfone membrane.

UF
Hydranautics logo

Product profile

HYDRAcap-40

The HYDRAcap-40 is a capillary ultrafiltration module utilizing hydrophilic polyethersulfone membrane for inside-to-outside filtration.

UF
Hydranautics logo

Product profile

HYDRAcap-40-LD

The HYDRAcap-40-LD is a capillary ultrafiltration module featuring a hydrophilic polyethersulfone membrane with a 0.02-micron pore size.

UF
Hydranautics logo

Product profile

HYDRAcap-MAX-40

The HYDRAcap-MAX-40 is a capillary microfiltration module with a PVDF membrane offering 560 ft² of nominal area for outside-to-inside filtration.

UF
Hydranautics logo

Product profile

HYDRAcap-60

The HYDRAcap-60 is a capillary ultrafiltration module constructed with hydrophilic polyethersulfone membrane polymer.

UF
Hydranautics logo

Product profile

HYDRAcap-60-LD

The HYDRAcap-60-LD is a capillary ultrafiltration module utilizing a hydrophilic polyethersulfone membrane with a 0.02 micron pore size.

Show remaining General Products profiles (3)
UF
Hydranautics logo

Product profile

HYDRAcap-MAX-60

The HYDRAcap-MAX-60 is a capillary microfiltration module utilizing PVDF membrane polymer for outside-to-inside filtration.

UF
Hydranautics logo

Product profile

HYDRAcap-80

The HYDRAcap-80 is a capillary ultrafiltration module with a hydrophilic polyethersulfone membrane, suitable for inside-to-outside filtration.

UF
Hydranautics logo

Product profile

HYDRAcap-MAX-80

The HYDRAcap-MAX-80 is a capillary ultrafiltration module featuring a TIPS PVDF membrane with a nominal area of 1130 ft².

Hydranautics UF Modules UF Modules | Models & Datasheets | AquaChain Guide