Back to Pumps & Pumping
Taco logo

International brand dossier

Taco Pumps

Taco Comfort Solutions is a U.

Brand profile and portfolio

Taco Comfort Solutions is a U.S.hydronic and water-driven solutions company founded in 1920, with pumps, valves, tanks, heat exchangers, and advanced controls for HVAC, plumbing, and industrial sectors.

In water-system selection it is relevant where circulation, hydronic efficiency, building services, packaged controls, and long-term support matter.Taco Pumps's position in pumps and pumping equipment is defined by product families such as centrifugal, multistage, submersible, dosing, booster, plunger, and high-pressure pump families.

The portfolio is best understood inside raw water intake, RO/NF feed, transfer, boosting, chemical dosing, wastewater lift, and desalination hydraulics, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include 1900 closed coupled in-line series pumps, 2400 series pumps and Cl SCi series pumps.Selection should focus on flow, head, efficiency, NPSH margin, wetted materials, seals, and drive arrangement.

10

Models and series

1

Product families

Model index

Quick Model Index

10 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 10 of 10 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

1900 closed coupled in-line series pumps

General Products

Flow Range: 10 to 250 GPM · Head Capabilities: To 160 feet · Power Factor: Above 99% (Above 98% at full load)

The Taco 1900 Series is a closed-coupled, in-line pump designed for water circulation and is available with optional variable speed drives.

DetailsPDF

2400 series pumps

General Products

Maximum Flow: 90 GPM · Maximum Head: 46 Feet · Maximum Working Pressure: 150psi

The 2400 Series High Capacity Circulators are designed for efficient liquid circulation in hydronic systems.

DetailsPDF

Cl SCi series pumps

General Products

Horsepower Range: 3 - 30hp

The CI Series Pumps are close-coupled, end-suction pumps designed for various water circulation, heating, cooling, and pressure boosting applications.

DetailsPDF

Fl SFI series pumps

General Products

ECM Motor Horsepower Range: 3 - 30 hp · Optional Mechanical Seal Materials: Tungsten Carbide/EPT or Silicon-Carbide/EPT · Protection: Electronically protected for overload and locked rotor conditions per UL 778 and CSA C22.2 No. 108

The Taco FI/SFI series pumps are frame-mounted end suction pumps designed for water circulation, HVAC, and boosting applications, featuring optional ECM motors and eLink...

DetailsPDF

GT series pumps

General Products

Maximum Temperature: 250°F (120°C) · Pressure-Temperature Ratings: See the official PDF for exact tabulated values and curves · Gauge Ports: Drilled and tapped for gauge ports at suction and discharge connections

The Taco GT series pumps are single-stage, double suction horizontal split case pumps designed for heating, cooling, and pressure boosting applications.

DetailsPDF

TC series pumps

General Products

Maximum Temperature: 250°F (120°C)

Taco TC Series pumps are single-stage, double suction vertical split case pumps for HVAC, pressure boosting, and water supply applications.

DetailsPDF

KS SKS series pumps

General Products

Selection cues: flow · head · power and wetted-part materials

The KS SKS series pumps are Taco Pumps' offering for various fluid-handling applications.

DetailsPDF

KV SKV series pumps

General Products

Selection cues: flow · head · power and wetted-part materials

The KV SKV series are close-coupled inline centrifugal pumps designed for various fluid-handling applications.

DetailsPDF

TA series pumps

General Products

Horsepower Range: 1/40 HP to 400 HP · Performance range: 60 GPM up to 6,000 GPM · Maximum Operating Pressure: 300 PSI

The Taco TA Series is a line of single-stage, double-suction horizontal split-case pumps designed for water circulation.

DetailsPDF

TS series pumps

General Products

Horsepower (HP) Range: From 5 HP up to 700 HP, depending on the model and flange size · Maximum Temperature: 250°F (120°C) · Voltages: 460 VOLT, 2300/4160 VOLT

The TS Series Pumps are single-stage, double suction vertical split case pumps designed for water circulation in various HVAC and water supply applications.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose Taco Pumps & Pumping

This section answers two questions: which main product families Taco offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are General Products. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare flow and head, materials, efficiency, and duty cycle. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

1 product families on this page.

General Products

10 models in this family. Representative models: 1900 closed coupled in-line series pumps, 2400 series pumps, Cl SCi series pumps.

Product introductions and documents

Brand Products & Technical Documents

10 models and series

View product applications, datasheets and family manuals.

General Products

10 product profiles

Pumps & Pumping
Taco logo

Product profile

1900 closed coupled in-line series pumps

The Taco 1900 Series is a closed-coupled, in-line pump designed for water circulation and is available with optional variable speed drives.

Pumps & Pumping
Taco logo

Product profile

2400 series pumps

The 2400 Series High Capacity Circulators are designed for efficient liquid circulation in hydronic systems.

Pumps & Pumping
Taco logo

Product profile

Cl SCi series pumps

The CI Series Pumps are close-coupled, end-suction pumps designed for various water circulation, heating, cooling, and pressure boosting applications.

Pumps & Pumping
Taco logo

Product profile

Fl SFI series pumps

The Taco FI/SFI series pumps are frame-mounted end suction pumps designed for water circulation, HVAC, and boosting applications, featuring optional ECM motors and eLink...

Pumps & Pumping
Taco logo

Product profile

GT series pumps

The Taco GT series pumps are single-stage, double suction horizontal split case pumps designed for heating, cooling, and pressure boosting applications.

Pumps & Pumping
Taco logo

Product profile

TC series pumps

Taco TC Series pumps are single-stage, double suction vertical split case pumps for HVAC, pressure boosting, and water supply applications.

Show remaining General Products profiles (4)
Pumps & Pumping
Taco logo

Product profile

KS SKS series pumps

The KS SKS series pumps are Taco Pumps' offering for various fluid-handling applications.

Pumps & Pumping
Taco logo

Product profile

KV SKV series pumps

The KV SKV series are close-coupled inline centrifugal pumps designed for various fluid-handling applications.

Pumps & Pumping
Taco logo

Product profile

TA series pumps

The Taco TA Series is a line of single-stage, double-suction horizontal split-case pumps designed for water circulation.

Pumps & Pumping
Taco logo

Product profile

TS series pumps

The TS Series Pumps are single-stage, double suction vertical split case pumps designed for water circulation in various HVAC and water supply applications.

Taco Pumps Pumps & Pumping | Models & Datasheets | AquaChain Guide