Magnetic Drive Pump
14 models in this family. Representative models: CPMD-01, CPMD-04, CPMD-07.
International brand dossier
Corode Pumps
Corode is a corrosion-resistant pump and filter-unit specialist for chemical and highly corrosive liquids, including fluids with small particles or metal residues.It is relevant where material compatibility, chemical resistance, mechanical seal design, filter-unit integration, and maintenance access are more important than standard clean-water pumping.
Corode Pumps's position in pumps and pumping equipment is defined by product families such as Magnetic Drive Pump, Filter unit, Vertical Pump and Bag Filter unit.The portfolio is best understood inside raw water intake, RO/NF feed, transfer, boosting, chemical dosing, wastewater lift, and desalination hydraulics, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.
Representative series on this page include CPMD-01, CPMD-04 and CPMD-07.Selection should focus on flow, head, efficiency, NPSH margin, wetted materials, seals, and drive arrangement.
51
Indexed models
5
Product families
0
Subgroups
Product range and selection
How to choose Corode Pumps & Pumping
This section answers two questions: which main product families Corode offers, and which parameters to compare before choosing a specific model.
Step 1: Choose a product family by application
The main families shown on this page are Magnetic Drive Pump, Filter unit, Vertical Pump, and Bag Filter unit. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.
Step 2: Confirm the model by key parameters
After choosing a product family, compare flow and head, materials, efficiency, and duty cycle. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.
Product family overview
5 product familys on this page.
Filter unit
17 models in this family. Representative models: CF01CM / CF02CM, CF02C double, CF04CM / CF04PM.
Vertical Pump
10 models in this family. Representative models: CS300-018, CS300-025, CS300-037.
Bag Filter unit
6 models in this family. Representative models: CF04B, CF07B, CF11B.
Oil & Fats Separator
4 models in this family. Representative models: COWS 07-10, COWS 11-18, COWS 11-35.
Quick Model Index
Fast lookup for 51 indexed products
The table is intentionally compact: use it to scan model names, product families, and source links quickly. Open the profile cards below when you want richer context.
Magnetic Drive Pump
14 indexed models
| Model | Application | Sources |
|---|---|---|
| CPMD-01 | The Corode CPMD-01 is a magnetic drive pump with a maximum flow rate of 1.8 m³/h and a maximum head of 5 meters. | |
| CPMD-04 | The Corode CPMD-04 is a magnetic drive pump available in PP or PVDF construction for chemical transfer. It offers a maximum flow of 3.7 m³/h, a maximum head of 7 mtr. | |
| CPMD-07 | The Corode CPMD-07 is a magnetic drive pump designed for chemical transfer applications. | |
| CPMD-11 | The CPMD-11 is a magnetic drive pump from Corode Pumps, available with a PP or PVDF pump body and EPDM or Viton O-rings. It offers a maximum flow of 11 m³/h. | |
| CPMD-15 | The Corode CPMD-15 is a magnetic drive pump designed for general fluid transfer applications. | |
| CPMD-20 | The Corode CPMD-20 is a magnetic drive pump designed for chemical processing applications. It is available in PP or PVDF materials with a maximum flow rate of 20. | |
| CPMD-30 | The Corode CPMD-30 is a magnetic drive pump designed for various fluid transfer applications. It is available in PP or PVDF pump body materials. | |
| CPMD-50 | The Corode CPMD-50 is a magnetic drive pump designed for chemical processing applications. It is available with PP or PVDF pump bodies and EPDM or Viton O-rings. | |
| MAG-04 | The Corode MAG-04 is a magnetic drive pump available in PP or PVDF materials with EPDM or Viton O-rings. It has a maximum flow of 3.5 m³/h, a maximum head of 7 meters. | |
| MAG-07 | The Corode MAG-07 is a magnetic drive pump designed for various fluid transfer applications. Available in PP or PVDF construction with EPDM or Viton O-rings. | |
| MAG-10 | The Corode MAG-10 is a magnetic drive pump available in PP or PVDF construction for various fluid handling applications. | |
| MAG-20 | The Corode MAG-20 is a magnetic drive pump designed for various fluid transfer applications. | |
| MAG-25 | The Corode MAG-25 is a magnetic drive pump designed for chemical applications. It is available with PP or PVDF wetted parts and EPDM or Viton o-rings. | |
| MAG-30 | The Corode MAG-30 is a magnetic drive pump designed for chemical process applications. |
Filter unit
17 indexed models
| Model | Application | Sources |
|---|---|---|
| CF01CM / CF02CM | The Corode CF01CM/CF02CM are filter units that include a magnetic drive pump and are available with a PP or PVDF filter housing. These units have a maximum flow rate of 1. | |
| CF02C double | The Corode CF02C double is a magnetically driven filter unit with a PP filter housing and pump head, suitable for 10" or 20" cartridge filters. | |
| CF04CM / CF04PM | The Corode CF04CM/CF04PM is a filter unit featuring a magnetic drive pump with a maximum flow rate of 3.7 m³/h. | |
| CF07CM / CF07PM | The Corode CF07CM/CF07PM is a filter unit series with an integrated magnetic drive pump. | |
| CF07CS / CF07PS | The Corode CF07CS/CF07PS is a filter unit designed for hot sealing processes, featuring a PP filter housing and SS316 exterior metal. | |
| CF11CM / CF11PM | The Corode CF11CM/CF11PM is a filter unit integrating a magnetic drive pump, available with filter housings in PP or PVDF and offering filter media options such as... | |
| CF11CS / CF11PS | The Corode CF11CS / CF11PS filter units are designed for hot sealing processes with a nominal flow rate of 7 m³/h. | |
| CF15C / CF15P | This Corode filter unit, powered by a magnetic drive pump, is available in cartridge or paper filter configurations with housing heights of 10 or 20 inches. | |
| CF20CM / CF20PM | These Corode CF20CM/CF20PM filter units are designed for fluid filtration, featuring a PP filter housing with SS316 exterior metal and a magnetic drive pump. | |
| CF20CS / CF20PS | The Corode CF20CS/CF20PS is a filter unit with a PP housing, suitable for hot sealing processes, and is equipped with a Corode seal pump. | |
| CF30M | The Corode CF30..M is a filter unit featuring a magnetic drive pump with a maximum capacity of 30 m³/h and a PP filter housing. | |
| CJF30 jumbo | The Corode CJF30 Jumbo is a filter unit with a PP housing and magnetic drive pump, designed for capacities up to 30 m³/h. | |
| FIL04C / FIL04P | The Corode FIL04C/FIL04P is a filter unit featuring a MAG-04 magnetic drive pump and available with PP or PVDF filter housings. | |
| FIL07C / FIL07P | This Corode filter unit, model FIL07C/FIL07P, is a complete system featuring a magnetic drive pump. | |
| FIL11C / FIL11P | The Corode FIL11 series are filter units offered with Polypropylene or Polyvinylidene Fluoride housings and include a MAG-10 magnetic drive pump. | |
| FIL20C / FIL20P | The Corode FIL20CM and FIL20PM are filter units integrated with a magnetic drive pump, designed for operation up to 80°C with flow rates from 4 to 23 m³/h. | |
| FIL30C / FIL30P | Corode FIL30C/FIL30P filter units are magnetic drive pump systems designed for filtration applications, featuring a PP filter housing and SS316 outer metal. |
Vertical Pump
10 indexed models
| Model | Application | Sources |
|---|---|---|
| CS300-018 | This Corode CS vertical pump is designed for general fluid transfer applications. It offers a maximum flow rate of 4. | |
| CS300-025 | The Corode CS300-025 is a vertical centrifugal pump designed for various fluid transfer applications. It is available in PP or PVDF materials with EPDM or Viton O-rings. | |
| CS300-037 | The Corode CS300-037 is a vertical centrifugal pump designed for chemical transfer applications. | |
| CS300-055 | This Corode CS vertical pump is designed for liquid transfer applications. It features a pump body available in PP or PVDF and can handle a maximum flow of 11.1 m³/h. | |
| CS300-075 | The Corode CS vertical pump is designed for chemical transfer applications. It is available in PP or PVDF construction and has a maximum flow rate of 12. | |
| CS300-110 | The Corode CS400-110 is a vertical pump designed for various fluid transfer applications. | |
| CS300-150 | This Corode CS vertical pump is designed for chemical processing applications, with models available in PP or PVDF construction. It offers a maximum flow rate of 18. | |
| CS300-220 | The Corode CS vertical pump is designed for various liquid transfer applications. It is available in PP or PVDF construction with EPDM or Viton O-rings. | |
| CS300-300 | The Corode CS vertical pump is designed for pumping corrosive liquids, with models offering up to 32 m³/h flow and 24 m head. | |
| CS300-400 | The Corode CS400-400 is a vertical pump designed for a maximum flow of 43.4 m³/h and a head of 25.2 m. |
Bag Filter unit
6 indexed models
| Model | Application | Sources |
|---|---|---|
| CF04B | This Corode CF04B bag filter unit features an integrated Corode magnetic drive pump and a PP filter housing. It offers a maximum temperature of 80°C. | |
| CF07B | The Corode CF07B is a bag filter unit featuring a magnetic drive pump and a PP filter housing. It operates with a maximum flow rate of 6. | |
| CF11B | The Corode CF11B.M is a bag filter unit featuring a magnetic drive pump. It offers a maximum flow rate of 11 m³/h, a polypropylene housing. | |
| FIL04B | The Corode FIL04B is a bag filter unit incorporating a magnetic drive pump, available in 20" or 30" filter housing heights. | |
| FIL07B | The FIL07B is a Corode bag filter system featuring a magnetic drive pump, designed for applications with a maximum temperature of 80°C. | |
| FIL11B | The FIL11B is a Corode bag filter unit featuring a Corode magnetic drive pump. It is constructed with a PP filter housing and SS316 outside metal. |
Oil & Fats Separator
4 indexed models
| Model | Application | Sources |
|---|---|---|
| COWS 07-10 | The Corode COWS-07-10 is an oils and fats separator designed for wastewater treatment. It features a PP filter housing and pump head, SS316 external metal. | |
| COWS 11-18 | The Corode COWS-11-18 is an oil and fat absorbing filter unit designed for liquid separation. It features a polypropylene filter housing and pump head. | |
| COWS 11-35 | The COWS 11-35 is an oil and fat absorbing filter unit that includes a seal pump for wastewater treatment. It features a filter housing and pump head made of PP. | |
| COWS 20-35 | The Corode COWS 20-35 is an oil and fat absorbing filter unit with an integrated seal pump, designed for flow rates up to 20 m³/h. |
Brand Technical Documents
51 readable document pages
These document pages collect product manuals, model notes, accessory documents, and application files for this brand in the current category. Open the PDF when original tables, diagrams, or full manuals are needed.
CF01CM / CF02CM
The Corode CF01CM/CF02CM are filter units that include a magnetic drive pump and are available with a PP or PVDF filter housing. These units have a maximum flow rate of 1.
CF02C double
The Corode CF02C double is a magnetically driven filter unit with a PP filter housing and pump head, suitable for 10" or 20" cartridge filters.
CF04B
This Corode CF04B bag filter unit features an integrated Corode magnetic drive pump and a PP filter housing. It offers a maximum temperature of 80°C.
CF04CM / CF04PM
The Corode CF04CM/CF04PM is a filter unit featuring a magnetic drive pump with a maximum flow rate of 3.7 m³/h.
CF07B
The Corode CF07B is a bag filter unit featuring a magnetic drive pump and a PP filter housing. It operates with a maximum flow rate of 6.
CF07CM / CF07PM
The Corode CF07CM/CF07PM is a filter unit series with an integrated magnetic drive pump.
CF07CS / CF07PS
The Corode CF07CS/CF07PS is a filter unit designed for hot sealing processes, featuring a PP filter housing and SS316 exterior metal.
CF11B
The Corode CF11B.M is a bag filter unit featuring a magnetic drive pump. It offers a maximum flow rate of 11 m³/h, a polypropylene housing.
CF11CM / CF11PM
The Corode CF11CM/CF11PM is a filter unit integrating a magnetic drive pump, available with filter housings in PP or PVDF and offering filter media options such as...
CF11CS / CF11PS
The Corode CF11CS / CF11PS filter units are designed for hot sealing processes with a nominal flow rate of 7 m³/h.
CF15C / CF15P
This Corode filter unit, powered by a magnetic drive pump, is available in cartridge or paper filter configurations with housing heights of 10 or 20 inches.
CF20CM / CF20PM
These Corode CF20CM/CF20PM filter units are designed for fluid filtration, featuring a PP filter housing with SS316 exterior metal and a magnetic drive pump.
CF20CS / CF20PS
The Corode CF20CS/CF20PS is a filter unit with a PP housing, suitable for hot sealing processes, and is equipped with a Corode seal pump.
CF30M
The Corode CF30..M is a filter unit featuring a magnetic drive pump with a maximum capacity of 30 m³/h and a PP filter housing.
CJF30 jumbo
The Corode CJF30 Jumbo is a filter unit with a PP housing and magnetic drive pump, designed for capacities up to 30 m³/h.
COWS 07-10
The Corode COWS-07-10 is an oils and fats separator designed for wastewater treatment. It features a PP filter housing and pump head, SS316 external metal.
COWS 11-18
The Corode COWS-11-18 is an oil and fat absorbing filter unit designed for liquid separation. It features a polypropylene filter housing and pump head.
COWS 11-35
The COWS 11-35 is an oil and fat absorbing filter unit that includes a seal pump for wastewater treatment. It features a filter housing and pump head made of PP.
COWS 20-35
The Corode COWS 20-35 is an oil and fat absorbing filter unit with an integrated seal pump, designed for flow rates up to 20 m³/h.
CPMD-01
The Corode CPMD-01 is a magnetic drive pump with a maximum flow rate of 1.8 m³/h and a maximum head of 5 meters.
CPMD-04
The Corode CPMD-04 is a magnetic drive pump available in PP or PVDF construction for chemical transfer. It offers a maximum flow of 3.7 m³/h, a maximum head of 7 mtr.
CPMD-07
The Corode CPMD-07 is a magnetic drive pump designed for chemical transfer applications.
CPMD-11
The CPMD-11 is a magnetic drive pump from Corode Pumps, available with a PP or PVDF pump body and EPDM or Viton O-rings. It offers a maximum flow of 11 m³/h.
CPMD-15
The Corode CPMD-15 is a magnetic drive pump designed for general fluid transfer applications.
CPMD-20
The Corode CPMD-20 is a magnetic drive pump designed for chemical processing applications. It is available in PP or PVDF materials with a maximum flow rate of 20.
CPMD-30
The Corode CPMD-30 is a magnetic drive pump designed for various fluid transfer applications. It is available in PP or PVDF pump body materials.
CPMD-50
The Corode CPMD-50 is a magnetic drive pump designed for chemical processing applications. It is available with PP or PVDF pump bodies and EPDM or Viton O-rings.
CS300-018
This Corode CS vertical pump is designed for general fluid transfer applications. It offers a maximum flow rate of 4.
CS300-025
The Corode CS300-025 is a vertical centrifugal pump designed for various fluid transfer applications. It is available in PP or PVDF materials with EPDM or Viton O-rings.
CS300-037
The Corode CS300-037 is a vertical centrifugal pump designed for chemical transfer applications.
CS300-055
This Corode CS vertical pump is designed for liquid transfer applications. It features a pump body available in PP or PVDF and can handle a maximum flow of 11.1 m³/h.
CS300-075
The Corode CS vertical pump is designed for chemical transfer applications. It is available in PP or PVDF construction and has a maximum flow rate of 12.
CS300-110
The Corode CS400-110 is a vertical pump designed for various fluid transfer applications.
CS300-150
This Corode CS vertical pump is designed for chemical processing applications, with models available in PP or PVDF construction. It offers a maximum flow rate of 18.
CS300-220
The Corode CS vertical pump is designed for various liquid transfer applications. It is available in PP or PVDF construction with EPDM or Viton O-rings.
CS300-300
The Corode CS vertical pump is designed for pumping corrosive liquids, with models offering up to 32 m³/h flow and 24 m head.
CS300-400
The Corode CS400-400 is a vertical pump designed for a maximum flow of 43.4 m³/h and a head of 25.2 m.
FIL04B
The Corode FIL04B is a bag filter unit incorporating a magnetic drive pump, available in 20" or 30" filter housing heights.
FIL04C / FIL04P
The Corode FIL04C/FIL04P is a filter unit featuring a MAG-04 magnetic drive pump and available with PP or PVDF filter housings.
FIL07B
The FIL07B is a Corode bag filter system featuring a magnetic drive pump, designed for applications with a maximum temperature of 80°C.
FIL07C / FIL07P
This Corode filter unit, model FIL07C/FIL07P, is a complete system featuring a magnetic drive pump.
FIL11B
The FIL11B is a Corode bag filter unit featuring a Corode magnetic drive pump. It is constructed with a PP filter housing and SS316 outside metal.
FIL11C / FIL11P
The Corode FIL11 series are filter units offered with Polypropylene or Polyvinylidene Fluoride housings and include a MAG-10 magnetic drive pump.
FIL20C / FIL20P
The Corode FIL20CM and FIL20PM are filter units integrated with a magnetic drive pump, designed for operation up to 80°C with flow rates from 4 to 23 m³/h.
FIL30C / FIL30P
Corode FIL30C/FIL30P filter units are magnetic drive pump systems designed for filtration applications, featuring a PP filter housing and SS316 outer metal.
MAG-04
The Corode MAG-04 is a magnetic drive pump available in PP or PVDF materials with EPDM or Viton O-rings. It has a maximum flow of 3.5 m³/h, a maximum head of 7 meters.
MAG-07
The Corode MAG-07 is a magnetic drive pump designed for various fluid transfer applications. Available in PP or PVDF construction with EPDM or Viton O-rings.
MAG-10
The Corode MAG-10 is a magnetic drive pump available in PP or PVDF construction for various fluid handling applications.
MAG-20
The Corode MAG-20 is a magnetic drive pump designed for various fluid transfer applications.
MAG-25
The Corode MAG-25 is a magnetic drive pump designed for chemical applications. It is available with PP or PVDF wetted parts and EPDM or Viton o-rings.
MAG-30
The Corode MAG-30 is a magnetic drive pump designed for chemical process applications.
AI-ready Product Profiles
Product cards for screening and future AI matching
These cards are designed as reusable product profiles: the same format can later appear in AI search results, shortlist views, and assisted product matching.
Magnetic Drive Pump
14 profile cards
Pumps & Pumping
Product profile
CPMD-01
The Corode CPMD-01 is a magnetic drive pump with a maximum flow rate of 1.8 m³/h and a maximum head of 5 meters.
Pumps & Pumping
Product profile
CPMD-04
The Corode CPMD-04 is a magnetic drive pump available in PP or PVDF construction for chemical transfer. It offers a maximum flow of 3.7 m³/h, a maximum head of 7 mtr.
Pumps & Pumping
Product profile
CPMD-07
The Corode CPMD-07 is a magnetic drive pump designed for chemical transfer applications.
Pumps & Pumping
Product profile
CPMD-11
The CPMD-11 is a magnetic drive pump from Corode Pumps, available with a PP or PVDF pump body and EPDM or Viton O-rings. It offers a maximum flow of 11 m³/h.
Pumps & Pumping
Product profile
CPMD-15
The Corode CPMD-15 is a magnetic drive pump designed for general fluid transfer applications.
Pumps & Pumping
Product profile
CPMD-20
The Corode CPMD-20 is a magnetic drive pump designed for chemical processing applications. It is available in PP or PVDF materials with a maximum flow rate of 20.
Show remaining Magnetic Drive Pump profiles (8)
Pumps & Pumping
Product profile
CPMD-30
The Corode CPMD-30 is a magnetic drive pump designed for various fluid transfer applications. It is available in PP or PVDF pump body materials.
Pumps & Pumping
Product profile
CPMD-50
The Corode CPMD-50 is a magnetic drive pump designed for chemical processing applications. It is available with PP or PVDF pump bodies and EPDM or Viton O-rings.
Pumps & Pumping
Product profile
MAG-04
The Corode MAG-04 is a magnetic drive pump available in PP or PVDF materials with EPDM or Viton O-rings. It has a maximum flow of 3.5 m³/h, a maximum head of 7 meters.
Pumps & Pumping
Product profile
MAG-07
The Corode MAG-07 is a magnetic drive pump designed for various fluid transfer applications. Available in PP or PVDF construction with EPDM or Viton O-rings.
Pumps & Pumping
Product profile
MAG-10
The Corode MAG-10 is a magnetic drive pump available in PP or PVDF construction for various fluid handling applications.
Pumps & Pumping
Product profile
MAG-20
The Corode MAG-20 is a magnetic drive pump designed for various fluid transfer applications.
Pumps & Pumping
Product profile
MAG-25
The Corode MAG-25 is a magnetic drive pump designed for chemical applications. It is available with PP or PVDF wetted parts and EPDM or Viton o-rings.
Pumps & Pumping
Product profile
MAG-30
The Corode MAG-30 is a magnetic drive pump designed for chemical process applications.
Filter unit
17 profile cards
Pumps & Pumping
Product profile
CF01CM / CF02CM
The Corode CF01CM/CF02CM are filter units that include a magnetic drive pump and are available with a PP or PVDF filter housing. These units have a maximum flow rate of 1.
Pumps & Pumping
Product profile
CF02C double
The Corode CF02C double is a magnetically driven filter unit with a PP filter housing and pump head, suitable for 10" or 20" cartridge filters.
Pumps & Pumping
Product profile
CF04CM / CF04PM
The Corode CF04CM/CF04PM is a filter unit featuring a magnetic drive pump with a maximum flow rate of 3.7 m³/h.
Pumps & Pumping
Product profile
CF07CM / CF07PM
The Corode CF07CM/CF07PM is a filter unit series with an integrated magnetic drive pump.
Pumps & Pumping
Product profile
CF07CS / CF07PS
The Corode CF07CS/CF07PS is a filter unit designed for hot sealing processes, featuring a PP filter housing and SS316 exterior metal.
Pumps & Pumping
Product profile
CF11CM / CF11PM
The Corode CF11CM/CF11PM is a filter unit integrating a magnetic drive pump, available with filter housings in PP or PVDF and offering filter media options such as...
Show remaining Filter unit profiles (11)
Pumps & Pumping
Product profile
CF11CS / CF11PS
The Corode CF11CS / CF11PS filter units are designed for hot sealing processes with a nominal flow rate of 7 m³/h.
Pumps & Pumping
Product profile
CF15C / CF15P
This Corode filter unit, powered by a magnetic drive pump, is available in cartridge or paper filter configurations with housing heights of 10 or 20 inches.
Pumps & Pumping
Product profile
CF20CM / CF20PM
These Corode CF20CM/CF20PM filter units are designed for fluid filtration, featuring a PP filter housing with SS316 exterior metal and a magnetic drive pump.
Pumps & Pumping
Product profile
CF20CS / CF20PS
The Corode CF20CS/CF20PS is a filter unit with a PP housing, suitable for hot sealing processes, and is equipped with a Corode seal pump.
Pumps & Pumping
Product profile
CF30M
The Corode CF30..M is a filter unit featuring a magnetic drive pump with a maximum capacity of 30 m³/h and a PP filter housing.
Pumps & Pumping
Product profile
CJF30 jumbo
The Corode CJF30 Jumbo is a filter unit with a PP housing and magnetic drive pump, designed for capacities up to 30 m³/h.
Pumps & Pumping
Product profile
FIL04C / FIL04P
The Corode FIL04C/FIL04P is a filter unit featuring a MAG-04 magnetic drive pump and available with PP or PVDF filter housings.
Pumps & Pumping
Product profile
FIL07C / FIL07P
This Corode filter unit, model FIL07C/FIL07P, is a complete system featuring a magnetic drive pump.
Pumps & Pumping
Product profile
FIL11C / FIL11P
The Corode FIL11 series are filter units offered with Polypropylene or Polyvinylidene Fluoride housings and include a MAG-10 magnetic drive pump.
Pumps & Pumping
Product profile
FIL20C / FIL20P
The Corode FIL20CM and FIL20PM are filter units integrated with a magnetic drive pump, designed for operation up to 80°C with flow rates from 4 to 23 m³/h.
Pumps & Pumping
Product profile
FIL30C / FIL30P
Corode FIL30C/FIL30P filter units are magnetic drive pump systems designed for filtration applications, featuring a PP filter housing and SS316 outer metal.
Vertical Pump
10 profile cards
Pumps & Pumping
Product profile
CS300-018
This Corode CS vertical pump is designed for general fluid transfer applications. It offers a maximum flow rate of 4.
Pumps & Pumping
Product profile
CS300-025
The Corode CS300-025 is a vertical centrifugal pump designed for various fluid transfer applications. It is available in PP or PVDF materials with EPDM or Viton O-rings.
Pumps & Pumping
Product profile
CS300-037
The Corode CS300-037 is a vertical centrifugal pump designed for chemical transfer applications.
Pumps & Pumping
Product profile
CS300-055
This Corode CS vertical pump is designed for liquid transfer applications. It features a pump body available in PP or PVDF and can handle a maximum flow of 11.1 m³/h.
Pumps & Pumping
Product profile
CS300-075
The Corode CS vertical pump is designed for chemical transfer applications. It is available in PP or PVDF construction and has a maximum flow rate of 12.
Pumps & Pumping
Product profile
CS300-110
The Corode CS400-110 is a vertical pump designed for various fluid transfer applications.
Show remaining Vertical Pump profiles (4)
Pumps & Pumping
Product profile
CS300-150
This Corode CS vertical pump is designed for chemical processing applications, with models available in PP or PVDF construction. It offers a maximum flow rate of 18.
Pumps & Pumping
Product profile
CS300-220
The Corode CS vertical pump is designed for various liquid transfer applications. It is available in PP or PVDF construction with EPDM or Viton O-rings.
Pumps & Pumping
Product profile
CS300-300
The Corode CS vertical pump is designed for pumping corrosive liquids, with models offering up to 32 m³/h flow and 24 m head.
Pumps & Pumping
Product profile
CS300-400
The Corode CS400-400 is a vertical pump designed for a maximum flow of 43.4 m³/h and a head of 25.2 m.
Bag Filter unit
6 profile cards
Pumps & Pumping
Product profile
CF04B
This Corode CF04B bag filter unit features an integrated Corode magnetic drive pump and a PP filter housing. It offers a maximum temperature of 80°C.
Pumps & Pumping
Product profile
CF07B
The Corode CF07B is a bag filter unit featuring a magnetic drive pump and a PP filter housing. It operates with a maximum flow rate of 6.
Pumps & Pumping
Product profile
CF11B
The Corode CF11B.M is a bag filter unit featuring a magnetic drive pump. It offers a maximum flow rate of 11 m³/h, a polypropylene housing.
Pumps & Pumping
Product profile
FIL04B
The Corode FIL04B is a bag filter unit incorporating a magnetic drive pump, available in 20" or 30" filter housing heights.
Pumps & Pumping
Product profile
FIL07B
The FIL07B is a Corode bag filter system featuring a magnetic drive pump, designed for applications with a maximum temperature of 80°C.
Pumps & Pumping
Product profile
FIL11B
The FIL11B is a Corode bag filter unit featuring a Corode magnetic drive pump. It is constructed with a PP filter housing and SS316 outside metal.
Oil & Fats Separator
4 profile cards
Pumps & Pumping
Product profile
COWS 07-10
The Corode COWS-07-10 is an oils and fats separator designed for wastewater treatment. It features a PP filter housing and pump head, SS316 external metal.
Pumps & Pumping
Product profile
COWS 11-18
The Corode COWS-11-18 is an oil and fat absorbing filter unit designed for liquid separation. It features a polypropylene filter housing and pump head.
Pumps & Pumping
Product profile
COWS 11-35
The COWS 11-35 is an oil and fat absorbing filter unit that includes a seal pump for wastewater treatment. It features a filter housing and pump head made of PP.
Pumps & Pumping
Product profile
COWS 20-35
The Corode COWS 20-35 is an oil and fat absorbing filter unit with an integrated seal pump, designed for flow rates up to 20 m³/h.