Back to UF Modules
Pentair logo

International brand dossier

Pentair X-Flow Modules

Pentair is a broad water equipment group whose water-treatment brands include control valves, softening components, filter housings and cartridges, pumps, membrane housings, and X-Flow membrane modules.

Brand profile and portfolio

Pentair is a broad water equipment group whose water-treatment brands include control valves, softening components, filter housings and cartridges, pumps, membrane housings, and X-Flow membrane modules.

Its influence comes from installed-base breadth: many residential, commercial, industrial, and packaged water systems are designed around Pentair components, so selection often depends on service parts, controls, and compatibility as much as on the individual product rating.

Pentair X-Flow Modules's position in ultrafiltration modules is defined by product families such as hollow-fiber, capillary, submerged, pressurized, and MBR-related UF membrane modules.The portfolio is best understood inside pretreatment, reuse, drinking water clarification, MBR solids separation, turbidity control, and pathogen barrier service, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Aquaflex 20, Aquaflex 40 and Aquaflex 55.

14

Models and series

1

Product families

Model index

Quick Model Index

14 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 14 of 14 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

Aquaflex 20

General Products

Permeate connection D2: 42.6 mm [1.68 Inch] · Nominal Pore Size: 20 nm · Membrane area: 20 m² [215 ft²]

The Aquaflex 20 is an ultrafiltration module for process and potable water applications.

DetailsPDF

Aquaflex 40

General Products

Typical Permeate Quality: SDI<3, turbidity <0.1 NTU · Permeate Connection D2: 42.6 mm [1.68 Inch] · Crossflow Flow Rate: 19.8 x v m³/h [26 x v gpm] (where v is superficial velocity in m/s [ft/s])

The Aquaflex 40 is an ultrafiltration module designed for process and potable water production.

DetailsPDF

Aquaflex 55

General Products

Retention / pore size: 20 nm · Typical Permeate Quality: SDI<3, turbidity <0.1 NTU · Permeate Connection d0: 42.6 mm [1.68 Inch]

The Aquaflex 55 is an ultrafiltration module designed for process and potable water production, featuring a PES/PVP membrane with a nominal pore size of 20 nm.

DetailsPDF

Aquaflex 64

General Products

Typical Permeate Quality: SDI<3, turbidity <0.1 NTU · Permeate Connection (d0): 42.6 mm [1.68 Inch] · Crossflow Flow Rate: 26.9 v m³/h [36 v gpm] (where v is superficial velocity in m/s [ft/s])

The Aquaflex 64 is an ultrafiltration (UF) module designed for process and potable water production, featuring a PES/PVP hydrophilic membrane with a nominal pore size of...

DetailsPDF

XIGA 40

General Products

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate collector inner diameter d0: 42.6 mm [1.68 Inch] · Membrane area: 40 m² [430 ft²]

The Pentair X-Flow XIGA 40 is an ultrafiltration module designed for process and potable water filtration, featuring a hydrophilic PES/PVP membrane with a nominal pore...

DetailsPDF

XIGA 55

General Products

Permeate Connection d0: 42.6 mm [1.68 Inch] · Nominal Pore Size: 20 nm · Membrane Area: 55 m² [590 ft²]

The Pentair X-Flow XIGA 55 is a hydrophilic PES/PVP ultrafiltration membrane module designed for process and potable water filtration applications.

DetailsPDF

XIGA 64

General Products

Retention / pore size: 20 nm · Permeate Connection d0: 42.6 mm [1.68 Inch] · Nominal Pore Size: 20 nm

The Pentair X-Flow XIGA 64 is an ultrafiltration membrane module for process and potable water filtration, featuring a PES/PVP membrane with a nominal pore size of 20 nm.

DetailsPDF

Compact 33V

General Products

Retention / pore size: 30 nm · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

The Compact 33V is an 8-inch ultrafiltration module featuring a hydrophilic PVDF membrane with a 30 nm pore size for water purification applications.

DetailsPDF

HFW1000

General Products

Permeate Connection d0: 42.6 mm [1.68 Inch] · Typical permeate quality: SDI < 3, turbidity < 0.1 NTU · Membrane Area: 40 m² [430 ft²]

The Pentair X-Flow HFW 1000 is a nanofiltration module for process and potable water production, removing color and providing >4-log virus reduction.

DetailsPDF

R-100 1.5 MF

General Products

Permeate port protrusion l₁: 112 mm · Permeate port lateral recess l₀: 125 mm · Permeate side, Coupling: DIN 11851, 65 NW

The Pentair X-Flow R-100 is a 6" stainless steel microfiltration module designed for aqueous solutions and beverages.

DetailsPDF

R-21 0.83UFC

General Products

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate length B: 71 mm [2.8 inch] · Permeate position C: 90 mm [3.5 inch]

The R-21 0.83UFC is a polyvinylpyrrolidone and polyethersulfone ultrafiltration module designed for process water production from surface water or WWTP effluent.

DetailsPDF

RX-300 1.5UFC

General Products

Membrane area: 0.04 m² [0.46 ft²] · Pressure-drop across module at 1 m/s: 4 kPa [0.6 psi] · Pressure-drop across module at 2 m/s: 17 kPa [2.5 psi]

The Pentair X-Flow RX-300 1.5UFC is an ultrafiltration pilot module designed for producing process and potable water from various It features a PES/PVP membrane with a...

DetailsPDF

RX-300 0.83UFC

General Products

Membrane area: 0.08 m² [0.86 ft²] · Pressure-drop across module at 1 m/s: 11 kPa [1.6 psi] · Pressure-drop across module at 2 m/s: 24 kPa [3.5 psi]

The Pentair X-Flow RX300 0.83UFC is an ultrafiltration pilot module designed for process and potable water production.

DetailsPDF

S-14

General Products

Temperature range: Up to 80 °C · Temperature change rate: During heating or cooling, the maximum value of 3°C/min above 35°C should never be exceeded to avoid irreparable damage · Dimensions: PSF (Art. No. 14107); Transfer Cap Type 1: AISI 316 (in case of Double Decker 50% Art. No 18036)

The S-14 is a microfiltration module designed for beer clarification, featuring a hydrophilic PES/PVP membrane.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose Pentair X-Flow UF Modules

This section answers two questions: which main product families Pentair X-Flow offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are General Products. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare module format, flux target, backwash strategy, and chemical tolerance. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

1 product families on this page.

General Products

14 models in this family. Representative models: Aquaflex 20, Aquaflex 40, Aquaflex 55.

Product introductions and documents

Brand Products & Technical Documents

14 models and series

View product applications, datasheets and family manuals.

General Products

14 product profiles

UF
Pentair logo

Product profile

Aquaflex 20

The Aquaflex 20 is an ultrafiltration module for process and potable water applications.

UF
Pentair logo

Product profile

Aquaflex 40

The Aquaflex 40 is an ultrafiltration module designed for process and potable water production.

UF
Pentair logo

Product profile

Aquaflex 55

The Aquaflex 55 is an ultrafiltration module designed for process and potable water production, featuring a PES/PVP membrane with a nominal pore size of 20 nm.

UF
Pentair logo

Product profile

Aquaflex 64

The Aquaflex 64 is an ultrafiltration (UF) module designed for process and potable water production, featuring a PES/PVP hydrophilic membrane with a nominal pore size of...

UF
Pentair logo

Product profile

XIGA 40

The Pentair X-Flow XIGA 40 is an ultrafiltration module designed for process and potable water filtration, featuring a hydrophilic PES/PVP membrane with a nominal pore...

UF
Pentair logo

Product profile

XIGA 55

The Pentair X-Flow XIGA 55 is a hydrophilic PES/PVP ultrafiltration membrane module designed for process and potable water filtration applications.

Show remaining General Products profiles (8)
UF
Pentair logo

Product profile

XIGA 64

The Pentair X-Flow XIGA 64 is an ultrafiltration membrane module for process and potable water filtration, featuring a PES/PVP membrane with a nominal pore size of 20 nm.

UF
Pentair logo

Product profile

Compact 33V

The Compact 33V is an 8-inch ultrafiltration module featuring a hydrophilic PVDF membrane with a 30 nm pore size for water purification applications.

NF
Pentair logo

Product profile

HFW1000

The Pentair X-Flow HFW 1000 is a nanofiltration module for process and potable water production, removing color and providing >4-log virus reduction.

UF Modules
Pentair logo

Product profile

R-100 1.5 MF

The Pentair X-Flow R-100 is a 6" stainless steel microfiltration module designed for aqueous solutions and beverages.

UF
Pentair logo

Product profile

R-21 0.83UFC

The R-21 0.83UFC is a polyvinylpyrrolidone and polyethersulfone ultrafiltration module designed for process water production from surface water or WWTP effluent.

UF
Pentair logo

Product profile

RX-300 1.5UFC

The Pentair X-Flow RX-300 1.5UFC is an ultrafiltration pilot module designed for producing process and potable water from various It features a PES/PVP membrane with a...

UF
Pentair logo

Product profile

RX-300 0.83UFC

The Pentair X-Flow RX300 0.83UFC is an ultrafiltration pilot module designed for process and potable water production.

UF Modules
Pentair logo

Product profile

S-14

The S-14 is a microfiltration module designed for beer clarification, featuring a hydrophilic PES/PVP membrane.

Pentair X-Flow Modules UF Modules | Models & Datasheets | AquaChain Guide