Back to Pumps & Pumping
SAER logo

International brand dossier

SAER Pumps

SAER Elettropompe is an Italian pump manufacturer founded in 1951 and known for submersible and surface pumps, motors, centrifugal pumps, and broad hydraulic coverage.

Brand profile and portfolio

SAER Elettropompe is an Italian pump manufacturer founded in 1951 and known for submersible and surface pumps, motors, centrifugal pumps, and broad hydraulic coverage.In water-treatment and RO-adjacent projects it is relevant where Italian-made pump families, motor options, material selection, and industrial or civil water duties must be compared.

SAER Pumps's position in pumps and pumping equipment is defined by product families such as Horizontal multi-stage pumps, Pressure units, End suction pumps and Submersible pumps.The portfolio is best understood inside raw water intake, RO/NF feed, transfer, boosting, chemical dosing, wastewater lift, and desalination hydraulics, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.

Representative series on this page include OP, TM, TMV and CB.Selection should focus on flow, head, efficiency, NPSH margin, wetted materials, seals, and drive arrangement.

11

Models and series

7

Product families

Model index

Quick Model Index

11 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 11 of 11 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

OP

Horizontal multi-stage pumps

Temperature of pumped liquid: min 0°C – max 90°C · Ambient temperature: max 40°C · Discharge connection: Cast iron GJL250 (EN-GJL250)

The SAER OP series comprises multi-stage horizontal centrifugal electric pumps designed for clean water applications, including domestic use, gardening, and general water...

DetailsPDF

TM, TMV

Horizontal multi-stage pumps

Selection cues: flow · head · power and wetted-part materials

The SAER TM and TMV are centrifugal pumps designed for various liquid transfer applications.

DetailsPDF

CB

Horizontal multi-stage pumps

Liquid temperature: From -15°C to +70°C · Maximum operating pressure: 9 bar · Maximum ambient temperature: 40°C (for higher temperatures, verification required)

The SAER KF series consists of peripheral electric pumps designed for domestic systems, water supply, and pressure boosting applications.

DetailsPDF

T-ONE

Pressure units

Flow: Max 15 m³/h · Head: Max 110 m · Liquid temperature: Min -15°C, Max 35°C

The T-ONE is a compact, patented electronic pressurization system by SAER Pumps for water distribution in civil, agricultural, and industrial applications.

DetailsPDF

IR, IRX

End suction pumps

Temperature of the pumped liquid: -15°C to +120°C · Max environment temperature: 40°C (for higher temperatures, verify) · Max manometric suction height: Approximately 1.5 m (characteristics reduce for heights up to 6-7 m)

The SAER IR, IRX series are close-coupled, end-suction electric pumps designed according to EN 733 rules for continuous service with clear water.

DetailsPDF

CL95-CLE95

Submersible pumps

Cable Material: Suitable for use with drinking water · Frequency: 50 Hz (3000 1/min) and 60 Hz (3600 1/min) · Three phase (0.37-3 kW): 30

The SAER CL95-CLE95 are 4-inch oil-filled, rewindable submersible motors available in 50 Hz and 60 Hz frequencies.

DetailsPDF

MBS/H/L

Submersible pumps

Maximum Flow Rate (Qmax): 18 m³/h · Maximum Head (Hmax): 113 m · Upper Support (for Head > 60 m versions): Precision casted AISI 304 steel

The SAER MBS/H/L series consists of enbloc submersible, surface, and in-line electric pumps designed for various water transfer applications.

DetailsPDF

NS-96

Submersible pumps

Rotation speed: 2900 1/min · Delivery connection: 1”1/4 G

The SAER NS-96 is a 4” electric submersible pump designed for various applications.

DetailsPDF

L-2P

Single stage in-line pumps

Power Range: 0.37 kW up to 75 kW · Liquid Temperature: Up to 140°C · Operating Pressure: PN16 as standard (PN25 on request up to DN50)

The SAER L-2P is a single-stage, in-line centrifugal pump designed for heating, cooling, civil, industrial, and water supply systems.

DetailsPDF

SKD

Split casing pumps

Selection cues: flow · head · power and wetted-part materials

The SAER SKD is a split-case pump designed for various applications.

DetailsPDF

NCA

Sewage / wate water pumps

Selection cues: flow · head · power and wetted-part materials

The NCA is a volute casing pump designed for various applications.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose SAER Pumps & Pumping

This section answers two questions: which main product families SAER offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are Horizontal multi-stage pumps, Pressure units, End suction pumps, and Submersible pumps. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare flow and head, materials, efficiency, and duty cycle. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

Showing 6 main families; all 7 appear in the model index below.

Horizontal multi-stage pumps

3 models in this family. Representative models: OP, TM, TMV, CB.

Pressure units

1 model in this family. Representative models: T-ONE.

End suction pumps

1 model in this family. Representative models: IR, IRX.

Submersible pumps

3 models in this family. Representative models: CL95-CLE95, MBS/H/L, NS-96.

Single stage in-line pumps

1 model in this family. Representative models: L-2P.

Split casing pumps

1 model in this family. Representative models: SKD.

Product introductions and documents

Brand Products & Technical Documents

11 models and series

View product applications, datasheets and family manuals.

Horizontal multi-stage pumps

3 product profiles

Pumps & Pumping
SAER logo

Product profile

OP

The SAER OP series comprises multi-stage horizontal centrifugal electric pumps designed for clean water applications, including domestic use, gardening, and general water...

Pumps & Pumping
SAER logo

Product profile

TM, TMV

The SAER TM and TMV are centrifugal pumps designed for various liquid transfer applications.

Pumps & Pumping
SAER logo

Product profile

CB

The SAER KF series consists of peripheral electric pumps designed for domestic systems, water supply, and pressure boosting applications.

Pressure units

1 product profiles

Pumps & Pumping
SAER logo

Product profile

T-ONE

The T-ONE is a compact, patented electronic pressurization system by SAER Pumps for water distribution in civil, agricultural, and industrial applications.

End suction pumps

1 product profiles

Pumps & Pumping
SAER logo

Product profile

IR, IRX

The SAER IR, IRX series are close-coupled, end-suction electric pumps designed according to EN 733 rules for continuous service with clear water.

Submersible pumps

3 product profiles

Pumps & Pumping
SAER logo

Product profile

CL95-CLE95

The SAER CL95-CLE95 are 4-inch oil-filled, rewindable submersible motors available in 50 Hz and 60 Hz frequencies.

Pumps & Pumping
SAER logo

Product profile

MBS/H/L

The SAER MBS/H/L series consists of enbloc submersible, surface, and in-line electric pumps designed for various water transfer applications.

Pumps & Pumping
SAER logo

Product profile

NS-96

The SAER NS-96 is a 4” electric submersible pump designed for various applications.

Single stage in-line pumps

1 product profiles

Pumps & Pumping
SAER logo

Product profile

L-2P

The SAER L-2P is a single-stage, in-line centrifugal pump designed for heating, cooling, civil, industrial, and water supply systems.

Split casing pumps

1 product profiles

Pumps & Pumping
SAER logo

Product profile

SKD

The SAER SKD is a split-case pump designed for various applications.

Sewage / wate water pumps

1 product profiles

Pumps & Pumping
SAER logo

Product profile

NCA

The NCA is a volute casing pump designed for various applications.

SAER Pumps Pumps & Pumping | Models & Datasheets | AquaChain Guide