UF Module with Multibore membrane
1 model in this family. Representative models: Dizzer XL 0.9 MB 60 W.
International brand dossier
DuPont Water Solutions is a global water purification and separation portfolio built around recognized technologies such as FilmTec membranes, AmberLite resins, inge ultrafiltration, and related industrial separation materials.
DuPont Water Solutions is a global water purification and separation portfolio built around recognized technologies such as FilmTec membranes, AmberLite resins, inge ultrafiltration, and related industrial separation materials.
Its influence comes from breadth: the same corporate water platform is used in drinking water, desalination, industrial reuse, pharmaceutical and food processing, electronics ultrapure water, and selective purification.
Inge (DuPont) Ultrafiltration's position in ultrafiltration modules is defined by product families such as UF Module with Multibore membrane, 4" UF Module with Multibore 0.9 membrane, Multibore Membrane and dizzer XL Module with Multibore 0.9 membrane.The portfolio is best understood inside pretreatment, reuse, drinking water clarification, MBR solids separation, turbidity control, and pathogen barrier service, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include Dizzer XL 0.9 MB 60 W, Dizzer P 4040-6.0 and Multibore membrane 7.
9
Models and series
8
Product families
Quick Model Index
Search specifications and compare candidates with products from other brands in the same category.
Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.
Showing 9 of 9 models
Compare 2–4 compatible models across brands. Your shortlist is saved on this device.
Dizzer XL 0.9 MB 60 W
UF Module with Multibore membrane
Retention / pore size: 0.02 µm · Membrame area: 40 m² (430 sq.ft.) · Pore size: approx. 0.02 µm
This Inge Dizzer XL ultrafiltration module features Multibore membranes with a pore size of approximately 0.02 µm.
Dizzer P 4040-6.0
4" UF Module with Multibore 0.9 membrane
Pore size: approx. 0.02 µm · Maximum system pressure: 10 bar (145 psi) · Burst pressure: >10 bar (>150 psi)
The dizzer® P series consists of Ultrafiltration modules designed for small-scale applications, such as Point-of-Use and Point-of-Entry systems.
Multibore membrane 7
Multibore Membrane
Retention / pore size: 20 nm · Pore size: approx. 20 nm · Transmembrane pressure in Filtration: 0.1 – 1.5 bar (1.5 – 20 psi)
This Inge (DuPont) Multibore® membrane module is designed for ultrafiltration with a pore size of approximately 20 nm.
Dizzer XL 0.9 MB 60 WR
dizzer XL Module with Multibore 0.9 membrane
Pore size: approx. 0.02 µm · Pressure max: 5 bar (70 psi) · Burst pressure membrane: > 10 bar (> 150 psi)
The Dizzer XL 0.9 MB 60 WR is an ultrafiltration module featuring Multibore 0.9 PESM membranes.
Dizzer XL 0.9 MB 64 P
dizzer XL Module with Multibore 0.9 membrane
Membrane area: 64 m² · Pore size: ca. 0.02 µm · Filtration pressure: 0.1 – 1.5 bar
The Dizzer XL 0.9 MB 64 P is an ultrafiltration module designed for water treatment applications.
Dizzer XL 1.5 MB 40 ST
dizzer XL Module with Multibore 1.5 membrane
Active membrane area: 40 m² / 430 ft² · Length incl. T-piece (B): 1879 mm / 74.0 inch · Module diameter (C): 250 mm / 9.8 inch
This Inge (DuPont) Dizzer XL 1.5 MB 40 ST is an ultrafiltration module featuring a Multibore® 1.5 membrane with 40 m² active area.
T-Rack vario 2 /4 rows
T-Rack Vario
Feed/drain header: PVC-U (with fixed flange according to ISO 7005 PN10, ANSI class 150) · Filtrate header: PVC-U (160 mm, with fixed flange according to ISO 7005 PN10, ANSI class 150) · Burst pressure membrane: > 10 bar (> 150 psi)
The T-Rack® vario is an integrated ultrafiltration system offering flexible configurations with two or four rows of dizzer® modules.
T-Rack 3.0-3.2 2 /4 rows
T-Rack 3.0
High Capacity: Supports up to 136 modules per rack · Pore size: approx. 0.02 µm · Burst pressure (membrane): > 10 bar (> 150 psi)
The T-Rack® 3.0 is a robust ultrafiltration rack solution for large-scale systems, integrating dizzer® XL modules with Multibore® membranes.
T-Rack 3.0 S 2 / 4 rows
T-Rack 3.0 S
Design pressure: 5 bar at 40°C with a service life of 10 years. This corresponds to a design pressure of 8.2 bar at 20°C · Burst pressure (membrane): > 10 bar (> 150 psi) · Permissible temperature range: 1 – 40 °C (34 – 104 °F)
The T-Rack 3.0 S is a compact and robust ultrafiltration system designed for space-saving and mobile applications.
Product range and selection
This section answers two questions: which main product families Inge DuPont offers, and which parameters to compare before choosing a specific model.
The main families shown on this page are UF Module with Multibore membrane, 4" UF Module with Multibore 0.9 membrane, Multibore Membrane, and dizzer XL Module with Multibore 0.9 membrane. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.
After choosing a product family, compare module format, flux target, backwash strategy, and chemical tolerance. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.
Showing 6 main families; all 8 appear in the model index below.
UF Module with Multibore membrane
1 model in this family. Representative models: Dizzer XL 0.9 MB 60 W.
4" UF Module with Multibore 0.9 membrane
1 model in this family. Representative models: Dizzer P 4040-6.0.
Multibore Membrane
1 model in this family. Representative models: Multibore membrane 7.
dizzer XL Module with Multibore 0.9 membrane
2 models in this family. Representative models: Dizzer XL 0.9 MB 60 WR, Dizzer XL 0.9 MB 64 P.
dizzer XL Module with Multibore 1.5 membrane
1 model in this family. Representative models: Dizzer XL 1.5 MB 40 ST.
T-Rack Vario
1 model in this family. Representative models: T-Rack vario 2 /4 rows.
Brand Products & Technical Documents
View product applications, datasheets and family manuals.
1 product profiles
Product profile
This Inge Dizzer XL ultrafiltration module features Multibore membranes with a pore size of approximately 0.02 µm.
1 product profiles
Product profile
The dizzer® P series consists of Ultrafiltration modules designed for small-scale applications, such as Point-of-Use and Point-of-Entry systems.
1 product profiles
Product profile
This Inge (DuPont) Multibore® membrane module is designed for ultrafiltration with a pore size of approximately 20 nm.
2 product profiles
Product profile
The Dizzer XL 0.9 MB 60 WR is an ultrafiltration module featuring Multibore 0.9 PESM membranes.
Product profile
The Dizzer XL 0.9 MB 64 P is an ultrafiltration module designed for water treatment applications.
1 product profiles
Product profile
This Inge (DuPont) Dizzer XL 1.5 MB 40 ST is an ultrafiltration module featuring a Multibore® 1.5 membrane with 40 m² active area.
1 product profiles
Product profile
The T-Rack® vario is an integrated ultrafiltration system offering flexible configurations with two or four rows of dizzer® modules.
1 product profiles
Product profile
The T-Rack® 3.0 is a robust ultrafiltration rack solution for large-scale systems, integrating dizzer® XL modules with Multibore® membranes.
1 product profiles
Product profile
The T-Rack 3.0 S is a compact and robust ultrafiltration system designed for space-saving and mobile applications.