Back to Instrumentation & Sensors
Wallace & Tiernan logo

International brand dossier

Wallace & Tiernan Analyzers - Controllers

Wallace & Tiernan is a Xylem disinfection brand with more than a century of association with gas chlorination, disinfection, chemical dosing, analyzers, controllers, and chlorine dioxide systems.

Brand profile and portfolio

Wallace & Tiernan is a Xylem disinfection brand with more than a century of association with gas chlorination, disinfection, chemical dosing, analyzers, controllers, and chlorine dioxide systems.

In water plants it is relevant where residual control, chemical feed, safety, and analyzer/controller integration are part of a disinfection train.Wallace & Tiernan Analyzers - Controllers's position in instrumentation and sensors is defined by product families such as flow, level, pressure, temperature, analytical sensors, analyzers, transmitters, and monitoring assemblies.

The portfolio is best understood inside online water-quality measurement, process control, chemical dosing feedback, plant monitoring, and safety interlocks, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.Representative series on this page include OPC Server, Process Monitor System and Acutec 35 Gas Detection System.

24

Models and series

1

Product families

Model index

Quick Model Index

24 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 24 of 24 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

OPC Server

General Products

Selection cues: measuring range · accuracy · output signal and process connection

The Wallace & Tiernan OPC-Server is a software application designed for data exchange with Wallace & Tiernan RS 485 bus compatible measurement and control systems.

DetailsPDF

Process Monitor System

General Products

Connection to Wallace & Tiernan Units: Via RS485 interface. Instruments are automatically identified by Bus-Scan · RS485 bus cable length: 1200 m / 4000 ft max · Maximum power consumption: 4.6 W

The Wallace & Tiernan Process Monitoring System is a data management solution for visualizing and controlling multiple disinfection processes.

DetailsPDF

Acutec 35 Gas Detection System

General Products

Concentration Output Signal: Isolated 4-20 mA DC, 1000 ohms maximum load · Connection Distance: Up to 1000 feet (300 m) to receiver via two-wire cable · Temperature: 0° to 105°F (-18° to 40°C) continuous; -10° to 120°F (-23° to 49°C) intermittent

The Acutec 35 is a self-testing gas detection system for ambient air monitoring, available for chlorine, ammonia, or sulfur dioxide.

DetailsPDF

pH Check Handheld Meter

General Products

Measuring range: 0 - 14 pH · Resolution: 0.01 pH · Temperature: 0 - 50 °C

This Wallace & Tiernan pH check handheld meter is a portable, battery-powered instrument for determining pH values in various applications.

DetailsPDF

P7 Advanced Photometer

General Products

Power Supply: 4 batteries (AAA/LR 03) · Wavelength specifications: 530/560 nm (Δλ= 5 nm); 610 nm (Δλ= 6 nm) · Dimensions: 35 mm (H) x 75 mm (W) x 155 mm (L)

The P7 Advanced Photometer is a handheld instrument for measuring up to seven water quality parameters, including chlorine, pH, and ozone.

DetailsPDF

P34 Professional Photometer

General Products

Temperature: 5 – 40 °C

The Wallace & Tiernan P34 Professional Photometer is a portable device for water analysis, capable of measuring up to 34 parameters.

DetailsPDF

GMS Plus Gas Detection

General Products

Measurement range: 0 – 50 °C · Operating temperature: 0 – 45 °C · Chlorine: 0 – 5 ppm or 0 – 20 ppm

The GMS Plus is a multi-function alarm system designed for monitoring gases and temperatures in up to two rooms using Chloratekt or passive 4-20 mA probes.

DetailsPDF

Ezetrol Touch Analyzer-Controller

General Products

Measuring ranges: 500/1000/2500 µS/cm or 5.00/10.0/20.0/50.0/100.0/200.0/300 mS/cm · Control range: 0.2 – 3.0 bar at valve inlet (3 – 43 psig) · Accuracy: < 0.5 % FS

The Ezetrol Touch Analyzer-Controller is a disinfection controller for pool water, measuring free chlorine, pH, and temperature, with optional ORP and conductivity...

DetailsPDF

SFC Measuring and Control System

General Products

1 x slot for fieldbus connection: Profibus® DP, Modbus® TCP (not applicable to SFC SC) · Relay Outputs: 4 x freely selectable two-way switches for process monitoring; SFC SC: 2 alarm/control contacts · Ambient Temperature: 0 – 50 °C (32 – 122 °F) (do not expose to direct sunlight)

The SFC instrumentation system is a modular device for continuous water quality measurement and control, functioning as an analyzer, controller, or combined unit.

DetailsPDF

SFC SC Flow Proportional Controller

General Products

Wide dosage range: 10 – 400 % · Ambient temperature: 0 – 50 °C (32 – 122 °F)

The Wallace & Tiernan SFC SC is a flow proportional controller designed for water treatment applications, offering intuitive operation with a graphical display.

DetailsPDF

Strantrol pH Controller

General Products

Selection cues: measuring range · accuracy · output signal and process connection

The Strantrol pH Controller is a control instrument for water treatment applications.

DetailsPDF

Strantrol HRR ORP Controller Flowcell

General Products

Selection cues: measuring range · accuracy · output signal and process connection

This is a Strantrol HRR ORP controller flowcell for water treatment applications.

DetailsPDF

Depolox Pool Compact Controller

General Products

Measuring Ranges: 500/1000/2500 µS/cm or 5.00/10.0/20.0/50.0/100.0/200.0/300 mS/cm · Control range: 0.2 – 3.0 bar at valve inlet (3 – 43 psig) · Accuracy: < 0.5 % FS

The DEPOLOX Pool Compact controller is a state-of-the-art disinfection controller measuring free chlorine, temperature, conductivity, ORP, and pH.

DetailsPDF

Depolox 700 M Analyzer for Potable Water

General Products

Control range: 0.25 – 3.0 bar (3 – 60 psi at valve inlet) · Output Contacts: Max. eight freely definable alarm contacts/general fault messages and controller outputs. Optional internal 4 x relay module (max. 6 A/250 V AC; 0.2 A/220 V DC) · Analog Outputs (Optional): 4 x 0/4 – 20 mA, freely configurable (Load ≤ 1000 Ohm, accuracy < 0.5 % FS, galv. isolated up to 50 V relative to earth)

The DEPOLOX 700 M is an analyzer designed for measurement and limited control tasks in the drinking and process water industry, capable of incorporating up to six...

DetailsPDF

Depolox 400 M Analyzer for Potable Water

General Products

Selection cues: measuring range · accuracy · output signal and process connection

The Depolox 400 M Analyzer is designed for potable water monitoring.

DetailsPDF

Depolox Pool E 700 P Pool Managemet System

General Products

Control range: 0.2 – 3.0 bar at valve inlet (3 – 43 psig) · Displayed range: 0 to max 20 mg/l (scale freely selectable) · Accuracy: < 0.5 % FS

The Depolox Pool E 700 P is a comprehensive pool management system for measurement and control in pool water treatment applications.

DetailsPDF

MFC-Depolox 5 Multi Funtions Controller

General Products

Regulation Range: 0.2 – 4.0 bar at pipe inlet; back pressure: max. 1.5 bar on pressure-resistant version · Measurement Ranges: 0 to 100/200/500 µg/l; 1.00/2.00/5.00/10.0/20.0/50.0/100/200 mg/l · Sample Water Connection: PVC hose 6 x 3 mm or PE hose 6 x 1 mm; screwed fittings 1/2 “

The Wallace & Tiernan MFC-Depolox 5 is a multi-function controller for accurate disinfectant addition in potable, industrial, and wastewater applications.

DetailsPDF

BLU Sentinel SE Aquatics Analyzer-Controller

General Products

Start of range adjustable: 0 to 5 · End of range adjustable: 9 to 10 pH · Start of range: 0 to 400 mV

The BLU Sentinel SE Aquatics Analyzer-Controller measures free chlorine, ORP, pH, and temperature, offering integrated web views for up to four pools and a 4” color...

DetailsPDF

BLU-Sentinel Pool & Spa Chemistry Controller

General Products

Dimensions (H x W x D): 6.25” x 6.25” x 3.5” (15.8 x 15.8 x 8.89 cm) · Weight: 3.5 lbs (1.3 kg) · Enclosure Materials: Polycarbonate, NEMA® (IP65)

The BLU-Sentinel Pool & Spa Chemistry Controller is designed for basic chemical balance control in pools, spas, and fountains, utilizing a High Resolution Redox® sensing...

DetailsPDF

BLU-Sentinel Pro Pool & Spa Chemistry Controller

General Products

Flow Control Valve Inlet Pressure Range: 0.2 – 3.0 bar (3 – 43 psig) · Displayed Range: 0 to max 20 mg/l · Measuring Ranges: 10, 20, 50, 100 mS/cm

The BLU-Sentinel Pro is a pool and spa water chemistry controller that measures pH, ORP, and free chlorine using Strantrol® sensing technology.

DetailsPDF

Micro 2000 Analyzer for CL2, CLO2, KMNO4

General Products

Choice of peristaltic pump speed: 1 rpm for minimal reagent usage, or 2 rpm for quick response in control loops · Free chlorine measurement: pH 4 buffer is used where the pH varies · Total chlorine measurement: pH 4 buffer and granular KI (potassium iodide) are used

This is an on-line amperometric analyzer for continuous measurement of oxidant residuals like free and total chlorine, chlorine dioxide, or potassium permanganate in...

DetailsPDF

DEOX 2000 Analyzer for SO2 Dechlorination

General Products

Recommended fluid velocity: 1.5 m/sec (5 ft/sec) · Maximum pressure: 8 bar (125 psi), throttled to less than 0.3 bar (5 psi) at the Y-strainer inlet

The DEOX 2000 is a dechlorination measurement module for on-line analysis of sulfite and total chlorine residuals in municipal wastewater, cooling water, and industrial...

DetailsPDF

Membran Sensors FC2, TC3, CD7, OZ7

General Products

Accuracy: 0.5 % FS · Sample water flow: Controlled to 33 l/h (0.15 US gpm) with max. 4 bar (58 psi) inlet pressure · Max. sample water temperature: +50 °C (122 °F)

These Wallace & Tiernan membrane sensors are designed for continuous on-line measurement of free chlorine, total chlorine, chlorine dioxide, or ozone.

DetailsPDF

Multi Sensor Validation System ( Dual , Triple)

General Products

Frequency Range: 50-60Hz · Power: 30 VA · Resolution: 14 bit Unipolar (5µA)

The Wallace & Tiernan Multi Sensor Validation System, available in Dual or Triple configurations, enhances confidence in water quality readings for DEPOLOX® analyzers.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose Wallace & Tiernan Analyzers - Controllers Instrumentation & Sensors

This section answers two questions: which main product families Wallace & Tiernan Analyzers - Controllers offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are General Products. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare measurement parameter, sample condition, signal integration, and maintenance frequency. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

1 product families on this page.

General Products

24 models in this family. Representative models: OPC Server, Process Monitor System, Acutec 35 Gas Detection System.

Product introductions and documents

Brand Products & Technical Documents

24 models and series

View product applications, datasheets and family manuals.

General Products

24 product profiles

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

OPC Server

The Wallace & Tiernan OPC-Server is a software application designed for data exchange with Wallace & Tiernan RS 485 bus compatible measurement and control systems.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Process Monitor System

The Wallace & Tiernan Process Monitoring System is a data management solution for visualizing and controlling multiple disinfection processes.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Acutec 35 Gas Detection System

The Acutec 35 is a self-testing gas detection system for ambient air monitoring, available for chlorine, ammonia, or sulfur dioxide.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

pH Check Handheld Meter

This Wallace & Tiernan pH check handheld meter is a portable, battery-powered instrument for determining pH values in various applications.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

P7 Advanced Photometer

The P7 Advanced Photometer is a handheld instrument for measuring up to seven water quality parameters, including chlorine, pH, and ozone.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

P34 Professional Photometer

The Wallace & Tiernan P34 Professional Photometer is a portable device for water analysis, capable of measuring up to 34 parameters.

Show remaining General Products profiles (18)
Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

GMS Plus Gas Detection

The GMS Plus is a multi-function alarm system designed for monitoring gases and temperatures in up to two rooms using Chloratekt or passive 4-20 mA probes.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Ezetrol Touch Analyzer-Controller

The Ezetrol Touch Analyzer-Controller is a disinfection controller for pool water, measuring free chlorine, pH, and temperature, with optional ORP and conductivity...

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

SFC Measuring and Control System

The SFC instrumentation system is a modular device for continuous water quality measurement and control, functioning as an analyzer, controller, or combined unit.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

SFC SC Flow Proportional Controller

The Wallace & Tiernan SFC SC is a flow proportional controller designed for water treatment applications, offering intuitive operation with a graphical display.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Strantrol pH Controller

The Strantrol pH Controller is a control instrument for water treatment applications.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Strantrol HRR ORP Controller Flowcell

This is a Strantrol HRR ORP controller flowcell for water treatment applications.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Depolox Pool Compact Controller

The DEPOLOX Pool Compact controller is a state-of-the-art disinfection controller measuring free chlorine, temperature, conductivity, ORP, and pH.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Depolox 700 M Analyzer for Potable Water

The DEPOLOX 700 M is an analyzer designed for measurement and limited control tasks in the drinking and process water industry, capable of incorporating up to six...

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Depolox 400 M Analyzer for Potable Water

The Depolox 400 M Analyzer is designed for potable water monitoring.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Depolox Pool E 700 P Pool Managemet System

The Depolox Pool E 700 P is a comprehensive pool management system for measurement and control in pool water treatment applications.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

MFC-Depolox 5 Multi Funtions Controller

The Wallace & Tiernan MFC-Depolox 5 is a multi-function controller for accurate disinfectant addition in potable, industrial, and wastewater applications.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

BLU Sentinel SE Aquatics Analyzer-Controller

The BLU Sentinel SE Aquatics Analyzer-Controller measures free chlorine, ORP, pH, and temperature, offering integrated web views for up to four pools and a 4” color...

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

BLU-Sentinel Pool & Spa Chemistry Controller

The BLU-Sentinel Pool & Spa Chemistry Controller is designed for basic chemical balance control in pools, spas, and fountains, utilizing a High Resolution Redox® sensing...

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

BLU-Sentinel Pro Pool & Spa Chemistry Controller

The BLU-Sentinel Pro is a pool and spa water chemistry controller that measures pH, ORP, and free chlorine using Strantrol® sensing technology.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Micro 2000 Analyzer for CL2, CLO2, KMNO4

This is an on-line amperometric analyzer for continuous measurement of oxidant residuals like free and total chlorine, chlorine dioxide, or potassium permanganate in...

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

DEOX 2000 Analyzer for SO2 Dechlorination

The DEOX 2000 is a dechlorination measurement module for on-line analysis of sulfite and total chlorine residuals in municipal wastewater, cooling water, and industrial...

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Membran Sensors FC2, TC3, CD7, OZ7

These Wallace & Tiernan membrane sensors are designed for continuous on-line measurement of free chlorine, total chlorine, chlorine dioxide, or ozone.

Instrumentation & Sensors
Wallace & Tiernan logo

Product profile

Multi Sensor Validation System ( Dual , Triple)

The Wallace & Tiernan Multi Sensor Validation System, available in Dual or Triple configurations, enhances confidence in water quality readings for DEPOLOX® analyzers.

Wallace & Tiernan Analyzers - Controllers Instrumentation & Sensors | Models & Datasheets | AquaChain Guide