Back to RO Membranes
Pentair logo

International brand dossier

Pentair RO Membranes

Pentair is a broad water equipment group whose water-treatment brands include control valves, softening components, filter housings and cartridges, pumps, membrane housings, and X-Flow membrane modules.

Brand profile and portfolio

Pentair is a broad water equipment group whose water-treatment brands include control valves, softening components, filter housings and cartridges, pumps, membrane housings, and X-Flow membrane modules.

Its influence comes from installed-base breadth: many residential, commercial, industrial, and packaged water systems are designed around Pentair components, so selection often depends on service parts, controls, and compatibility as much as on the individual product rating.

Pentair RO Membranes's position in RO/NF membranes and related equipment is defined by product families such as RO, NF, UF-adjacent membrane elements, membrane contactors, pressure vessels, housings, and related separation products.The portfolio is best understood inside brackish water, seawater desalination, ultrapure water, process separation, reuse, degassing, and membrane system packaging, where engineers compare the technology route, family boundaries, and duty fit before narrowing to individual models.

51

Models and series

1

Product families

Model index

Quick Model Index

51 models and series

Search specifications and compare candidates with products from other brands in the same category.

Products & documents
Filter by numeric range

Uses the displayed unit. Missing specifications, ranges and test conditions are excluded from scalar filters.

Showing 51 of 51 models

Compare 2–4 compatible models across brands. Your shortlist is saved on this device.

Ask with selected models

40845 Structural Polyglass Vessels

General Products

Maximum operating pressure: 150 psi · Maximum operating temperature: 120°F

These Structural Polyglass Vessels are designed for residential and light commercial water treatment, featuring a seamless high-density polyethylene liner and an...

DetailsPDF

40846 Structural Composite Vessels

General Products

Maximum operating pressure: 150 psi · L: 4.1" · I.D: 4.0"

These are structural composite pressure vessels made from reinforced fiberglass, suitable for commercial and industrial water treatment.

DetailsPDF

Composite Vessel 42575

General Products

Operating Pressure: 150 PSI / 10.34 bar

This STRUCTURAL Composite Pressure Vessel is designed for large commercial and industrial applications including softening, filtration, and storage.

DetailsPDF

Poly-Glass Vessels

General Products

Maximum operating pressure: 150 psi · Maximum operating temperature: 120°F

These Poly-Glass vessels are designed for residential and light commercial water softener and filtration applications, featuring an inner shell of polyethylene and...

DetailsPDF

Structural FRP Vessels

General Products

Maximum operating pressure: 150 psi · Material of construction: Polyester, Vinylester

These Structural FRP vessels are designed for residential and light commercial water treatment, available in standard polyester or chemical-resistant vinylester...

DetailsPDF

Structural polyglass Vessels

General Products

Capacity (Gallons / Liters): .. · Maximum operating pressure: 150 psi · Maximum operating temperature: 120° F

Structural Poly Glass™ pressure vessels are designed for residential and light commercial water softener and filtration applications, offering high strength and chemical...

DetailsPDF

Structural Pressure Vessels

General Products

Operating Pressure: Min 0 bar - Max 10 bar

Pentair RO Membranes Structural Pressure Vessels are corrosion-free composite tanks for water treatment and storage.

DetailsPDF

PRF RO Membranes

General Products

Permeate Tubing: 1.22 meters of 9.53 mm blue tubing (4 feet of 3/8" blue tubing) · Flow Adjustment Based on TDS: Estimated Flow Change from 750 ppm NaCl/RO = -0.0002 (TDS) + 0.15 · Performance - Flow Rate Characteristics: Graphs illustrating flow rate characteristics at 50°F, 65°F, and 80°F based on 750 ppm TDS inlet water and driving pressure (psi) are available in the PDF

The Pentair Water® PRF-RO is a reverse osmosis system designed for continuous flow, eliminating the need for electric pumps or storage tanks in most applications.

DetailsPDF

RO 2500 Membranes

General Products

Pressure range: 2.07-8.6 bar (30-125 psi)

The Pentair RO 2500 is a reverse osmosis system designed for residential point-of-use drinking water applications, including undersink installations and icemaker...

DetailsPDF

RO 2600 Membranes

General Products

TDS rejection: 90% @ 2 bar inlet · Tank capacity max: 16.5 L · Pressure range: 1.4–6.9 bar

The Pentair RO-2600 is a 5-stage reverse osmosis system designed for producing high-purity water.

DetailsPDF

Water Miracle Pentair

General Products

Maximum capacity: 2,000 or 3,000 l/h (530 to 800 gallons per hour) · Power supply: Direct electricity or a gas-powered generator · Dimensions (m): 1.2 x 0.8 x 2.3

The Water Miracle is a compact, decentralized ultrafiltration system designed by Pentair X-Flow to produce high-quality drinking water from fresh surface water It...

DetailsPDF

Microguard

General Products

Initial ΔP @ Flow Rate: 11 psi @ 1 gpm (0.76 bar @ 3.8 Lpm) (based on manufacturer's internal testing) · Operating Pressure Range: 5-88 psi (0.35-6.1 bar) max · Maximum Pressure Differential: 88 psi (6.1 bar) max

The Pentair MicroGuard MG-10MCB is a reverse osmosis and nanofiltration membrane element designed for safer drinking water with integral carbon block and sediment...

DetailsPDF

X-Flow-B-0125

General Products

Transmembrane pressure: -20 .. + 1000 kPa · Temperature: 1 - 70 °C · Tubular Membrane Diameter: 14.4 mm

The X-Flow-B-0125 is an advanced tubular ultrafiltration membrane element for industrial food and non-food applications.

DetailsPDF

X-Flow-Compact-1-2

General Products

Max. permeate pressure: 1000 kPa · Permeate connection d0/d1: 26/19 mm · Permeate length I0: 75 mm

The Pentair X-Flow Compact 1.2 is an ultrafiltration membrane element designed for effluent treatment and membrane bioreactor applications.

DetailsPDF

X-Flow-Compact-1-6 -5-2MM

General Products

Permeate connection d0/d1: 26/19 mm · Permeate length I0: 75 mm · Permeate position I1: 66 mm (±1)

This X-Flow-Compact-1-6 -5-2MM is a hydrophilic tubular polyvinylidene fluoride ultrafiltration membrane element designed for large-scale water purification with good...

DetailsPDF

X-Flow-Compact-4-0G

General Products

Permeate connection d1: 1 inch · Permeate length I0: 80 mm · Permeate position I1: 66 mm (±1)

This Pentair X-Flow-Compact-4-0G is an ultrafiltration membrane element designed for effluent treatment and membrane bioreactor applications.

DetailsPDF

X-Flow-Compact-5-1G-5-2MM

General Products

Permeate connection d1: 1 inch · Permeate length I0: 80 mm · Permeate position I1: 66 mm (±1)

This X-Flow-Compact-5-1G-5-2MM is an ultrafiltration membrane element designed for large-scale water purification with excellent anti-fouling properties and...

DetailsPDF

X-Flow-Compact-22V

General Products

Permeate connection d0: 73.0 mm · Permeate length l0: 165 mm (±1) · Permeate position l1: 90 mm (±1)

The Pentair X-Flow Compact 22V is an 8-inch ultrafiltration membrane element designed for various water purification applications including pre-treatment, wastewater...

DetailsPDF

X-Flow-Compact-27G-Helix

General Products

Max. permeate pressure: 1250 kPa · Feed-permeate differential pressure: -20 ~ +250 kPa (at 20 - 60 °C) · Permeate connection d0: 73.0 mm

The Pentair X-Flow Compact 27G Helix is an ultrafiltration membrane element designed for effluent treatment, membrane bioreactors, and large-scale water purification.

DetailsPDF

X-Flow-Compact-27G

General Products

Permeate connection d0: 73.0 mm · Permeate length I0: 40 mm (±1) · Permeate position I1: 90 mm (±1)

This is a Pentair X-Flow Compact 27G ultrafiltration membrane element with a hydrophilic polyvinylidene fluoride membrane on a polyester/polyolefine carrier.

DetailsPDF

X-Flow-Compact-27-Helix

General Products

Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1) · Permeate position I1: 90 mm (±1)

The Pentair X-Flow Compact 27 Helix is an 8-inch ultrafiltration membrane module designed for effluent treatment and membrane bioreactor applications.

DetailsPDF

X-Flow-Compact-27

General Products

Retention / pore size: 30 nm · Max. Permeate Pressure: 650 kPa at 20 °C · Permeate connection d0: 73.0 mm

This is a Pentair X-Flow-Compact-27 ultrafiltration membrane element with a mean pore size of 30 nm, suitable for effluent treatment and membrane bioreactor applications.

DetailsPDF

X-Flow-Compact-33G-Helix

General Products

Max. permeate pressure: 1250 kPa (at 20-60 °C) · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

The X-Flow-Compact-33G-Helix is an ultrafiltration membrane element designed for large-scale water purification processes.

DetailsPDF

X-Flow-Compact-33G

General Products

Max. permeate pressure: 60 kPa (at 20-60 °C) · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

This is a Pentair X-Flow Compact 33G tubular ultrafiltration membrane module with a 33 m² membrane area.

DetailsPDF

X-Flow-Compact-33-Helix

General Products

Max. permeate pressure: -100 ~ +250 kPa · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

The Pentair X-Flow Compact 33 Helix is an 8-inch ultrafiltration membrane element with a Helix structure designed for high performance and reduced fouling in various...

DetailsPDF

X-Flow-Compact-33

General Products

Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1) · Permeate position I1: 90 mm (±1)

The X-Flow Compact 33 is an ultrafiltration membrane element for water purification, with applications in pre-treatment, wastewater treatment, and drinking water...

DetailsPDF

X-Flow-Compact-33V-Helix

General Products

Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1) · Permeate position I1: 90 mm (±1)

The X-Flow-Compact-33V-Helix is an 8-inch ultrafiltration membrane element with a hydrophilic tubular polyvinylidene fluoride membrane and a Helix surface structure for...

DetailsPDF

X-Flow-Compact-33V

General Products

Retention / pore size: 30 nm · Permeate connection d0: 73.0 mm · Permeate length I0: 165 mm (±1)

This Pentair X-Flow Compact 33V is an 8-inch ultrafiltration membrane element with a 30 nm mean pore size and PVDF membrane material.

DetailsPDF

X-Flow-Compact-75G-Helix

General Products

Permeate position: 290 mm · Permeate length: 250 mm · Permeate connection ID: 65 mm

This Pentair X-Flow Compact 75G Helix is an ultrafiltration membrane element with a 75 m² membrane area, featuring a hydrophilic polyvinylidene fluoride membrane with a...

DetailsPDF

X-Flow-Compact-75G

General Products

Max. permeate pressure: 600 kPa · Feed-permeate differential pressure: -100..+250 kPa · Permeate position: 290 mm

This membrane is suitable for: Pre-treatment RO and NF、Surface water、Drinking and process water production、Recovery of sandfilter backwash water、Effluent...

DetailsPDF

X-Flow-Compact-75G-non-coded

General Products

Retention / pore size: 30 nm · Max. permeate pressure: 1250 kPa · Permeate connection d0: 73.0 mm

This Pentair X-Flow Compact 75G non-coded membrane element features a hydrophilic polyvinylidene fluoride tubular membrane with a 30 nm pore size, suitable for various...

DetailsPDF

X-Flow-F-0285

General Products

Nominal pore size: 25 nm · Transmembrane pressure: -20 to +300 kPa · Temperature: 1 - 70 °C

This X-Flow-F-0285 is a classic ultrafiltration membrane element featuring a hydrophilic tubular polyvinylidene fluoride membrane for industrial food and non-food...

DetailsPDF

X-Flow-HFS60

General Products

Silica retention: Typical > 99.8% for colloidal silica (tested on surface water containing 10 mg/l total silica and 1 mg/l colloidal silica) · Permeate connection d0: 42.6 mm (1.68 Inch) · Typical permeate quality: SDI<3, turbidity <0.1 NTU

The Pentair X-Flow HFS 60 is a tight ultrafiltration membrane element designed for colloidal silica removal from surface water.

DetailsPDF

X-Flow-HFW1000

General Products

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate connection d0: 42.6 [1.68] mm/Inch · Crossflow flow rate: 19.8 x v [26 x v] m³/h/gpm (where v is superficial velocity in m/s [ft/s])

This is an 8-inch PVC housing X-Flow HFW 1000 nanofiltration membrane element designed for process and potable water production with minimal salt retention.

DetailsPDF

X-Flow-R21-0-9UFC

General Products

Retention / pore size: 20 nm · Permeate Length B: 71 mm / 2.8 inch · Permeate Position C: 87 mm / 3.4 inch

The X-Flow R21 0.9UFC is an ultrafiltration module made from a PES/PVP blend, suitable for process water production and featuring a nominal pore size of 20 nm.

DetailsPDF

X-Flow-R-21-HFS

General Products

Typical Permeate Quality: SDI<3, turbidity <0.1 NTU · Permeate Length B: 71 mm [2.8 inch] · Permeate Position C: 87 mm [3.4 inch]

This Pentair X-Flow R-21 HFS is an ultrafiltration membrane module used for producing process water from surface water or WWTP effluent.

DetailsPDF

X-Flow-R-100-MF

General Products

Permeate port protrusion l1: 112 mm · Permeate port lateral recess l0: 125 mm · Permeate side: Coupling: DIN 11851, 65 NW

This Pentair X-Flow R-100 MF is a microfiltration membrane element designed for filtering aqueous solutions and beverages in crossflow mode.

DetailsPDF

X-Flow-RX300-0-9UFC

General Products

Membrane area: 0.08 m² [0.86 ft²] · Pressure-drop across module at 1 m/s: 11 kPa [1.6 psi] · Pressure-drop across module at 2 m/s: 24 kPa [3.5 psi]

The X-flow RX-300 0.9UFC is an ultrafiltration pilot module for producing process and potable water from surface water, potable water, and WWTP effluent.

DetailsPDF

X-Flow-RX300-1-5UFC

General Products

Membrane area: 0.04 m² [0.46 ft²] · Pressure-drop across module at 1 m/s: 4 kPa [0.6 psi] · Pressure-drop across module at 2 m/s: 17 kPa [2.5 psi]

The X-Flow-RX300-1-5UFC is an ultrafiltration pilot module for process and potable water production, featuring PES/PVP membrane material within a PSF housing.

DetailsPDF

X-Flow-RX300-09UFC

General Products

Flow rate: 0.27 x v [1.19 x v] where 'v' is superficial velocity in m/s [ft/s] · Membrane area: 0.08 m² [0.86 ft²] · Max. temperature: 60 °C [140 °F]

This Pentair X-Flow-RX300-09UFC is an ultrafiltration pilot module designed for process and potable water production.

DetailsPDF

X-Flow-S-14

General Products

Permeate connection D3: 50.5 (32) [mm] · O-ring (Permeate, Type 1 and 2): EPDM (Art. No. 32040) · Membrane area: 9.8 [m²]

The X-Flow S-14 is a microfiltration membrane module designed for beer clarification using a feed and bleed crossflow operation with backwash and CIP.

DetailsPDF

X-Flow-S-0325

General Products

Transmembrane pressure: -20 .. +1000 kPa · Temperature: 1 - 70 °C · Hydrolic diameter: 14.5 mm

The X-Flow S 0325 is a tubular polysulfone ultrafiltration membrane for industrial food and non-food applications.

DetailsPDF

X-Flow-Seaflex-64

General Products

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate connection d0: 42.6 mm [1.68 Inch] · Crossflow flow rate: 26.9\v m³/h [36\v gpm] (where v = superficial velocity in m/s [ft/s])

The X-Flow-Seaflex-64 is an ultrafiltration membrane module designed for seawater reverse osmosis pre-treatment.

DetailsPDF

X-Flow-Seaguard-40

General Products

Permeate collector inner diameter d₀: 42.6 mm [1.68 Inch] · Nominal Pore Size: 20 nm · Membrane area: 40 m² [430 ft²]

The X-Flow Seaguard 40 is an ultrafiltration membrane element designed for seawater reverse osmosis pre-treatment.

DetailsPDF

X-Flow-Seaguard-55

General Products

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate connection d0: 42.6 mm [1.68 Inch] · Membrane area: 55 m² [590 ft²]

The Pentair X-Flow Seaguard 55 is an ultrafiltration membrane element designed for pretreatment in seawater reverse osmosis systems.

DetailsPDF

X-Flow-Seaguard-64

General Products

Permeate Connection Diameter (d0): 42.6 mm [1.68 Inch] · Nominal Pore Size: 20 nm · Effective Membrane Area: 64 m² [687 ft²]

This Pentair X-Flow Seaguard 64 is an ultrafiltration membrane element designed for pretreatment in seawater reverse osmosis applications.

DetailsPDF

X-Flow-Xiga-40

General Products

Permeate Collector Inner Diameter (d0): 42.6 mm [1.68 inch] · Nominal Pore Size: 20 nm · Membrane Area: 40 m² [430 ft²]

The Xiga 40 is an ultrafiltration membrane element designed for process and potable water filtration in dead-end operation.

DetailsPDF

X-Flow-Xiga-55

General Products

Typical permeate quality: SDI<3, turbidity <0.1 NTU · Permeate connection d0: 42.6 mm [1.68 Inch] · Pore size: A nominal pore size of 20 nm

The Pentair X-Flow XIGA 55 is an Ultrafiltration (UF) membrane element designed for process and potable water filtration, offering 55 m² of surface area.

DetailsPDF

X-Flow-Xiga-64

General Products

Retention / pore size: 20 nm · Permeate Connection (d0): 42.6 mm / 1.68 Inch · Nominal Pore Size: 20 nm

This Pentair X-Flow Xiga 64 is an ultrafiltration membrane element with a nominal pore size of 20 nm, designed for process and potable water filtration.

DetailsPDF

RO-2500 RO Drinking water system

General Products

Selection cues: rejection · permeate flow · membrane area and operating pressure

The Pentair RO 2500 is a reverse osmosis membrane element designed for drinking water applications.

DetailsPDF

RO-2600 RO Drinking water system

General Products

Selection cues: rejection · permeate flow · membrane area and operating pressure

The Pentair RO-2600 is a reverse osmosis membrane element designed for drinking water applications.

DetailsPDF
Product families and selection guidance

Product range and selection

How to choose Pentair RO Pressure vessel brands

This section answers two questions: which main product families Pentair RO offers, and which parameters to compare before choosing a specific model.

Step 1: Choose a product family by application

The main families shown on this page are General Products. Start with the treatment objective, equipment format, and operating duty, then use the model index below to compare exact specifications.

Step 2: Confirm the model by key parameters

After choosing a product family, compare feed salinity, target salt rejection, permeate flow, operating pressure, fouling tendency, and element size and connection. Replacement projects should also verify installation or loading conditions, interfaces, and compatibility with the existing system; new projects should consider operating practice, maintenance, and spare-parts or consumables availability.

Product family overview

1 product families on this page.

General Products

51 models in this family. Representative models: 40845 Structural Polyglass Vessels, 40846 Structural Composite Vessels, Composite Vessel 42575.

Product introductions and documents

Brand Products & Technical Documents

51 models and series

View product applications, datasheets and family manuals.

General Products

51 product profiles

Pressure vessel brands
Pentair logo

Product profile

40845 Structural Polyglass Vessels

These Structural Polyglass Vessels are designed for residential and light commercial water treatment, featuring a seamless high-density polyethylene liner and an...

Membrane housing / pressure vessel
Pentair logo

Product profile

40846 Structural Composite Vessels

These are structural composite pressure vessels made from reinforced fiberglass, suitable for commercial and industrial water treatment.

Membrane housing / pressure vessel
Pentair logo

Product profile

Composite Vessel 42575

This STRUCTURAL Composite Pressure Vessel is designed for large commercial and industrial applications including softening, filtration, and storage.

Pressure vessel brands
Pentair logo

Product profile

Poly-Glass Vessels

These Poly-Glass vessels are designed for residential and light commercial water softener and filtration applications, featuring an inner shell of polyethylene and...

Pressure vessel brands
Pentair logo

Product profile

Structural FRP Vessels

These Structural FRP vessels are designed for residential and light commercial water treatment, available in standard polyester or chemical-resistant vinylester...

Membrane housing / pressure vessel
Pentair logo

Product profile

Structural polyglass Vessels

Structural Poly Glass™ pressure vessels are designed for residential and light commercial water softener and filtration applications, offering high strength and chemical...

Show remaining General Products profiles (45)
Membrane housing / pressure vessel
Pentair logo

Product profile

Structural Pressure Vessels

Pentair RO Membranes Structural Pressure Vessels are corrosion-free composite tanks for water treatment and storage.

RO
Pentair logo

Product profile

PRF RO Membranes

The Pentair Water® PRF-RO is a reverse osmosis system designed for continuous flow, eliminating the need for electric pumps or storage tanks in most applications.

RO
Pentair logo

Product profile

RO 2500 Membranes

The Pentair RO 2500 is a reverse osmosis system designed for residential point-of-use drinking water applications, including undersink installations and icemaker...

RO
Pentair logo

Product profile

RO 2600 Membranes

The Pentair RO-2600 is a 5-stage reverse osmosis system designed for producing high-purity water.

UF
Pentair logo

Product profile

Water Miracle Pentair

The Water Miracle is a compact, decentralized ultrafiltration system designed by Pentair X-Flow to produce high-quality drinking water from fresh surface water It...

NF
Pentair logo

Product profile

Microguard

The Pentair MicroGuard MG-10MCB is a reverse osmosis and nanofiltration membrane element designed for safer drinking water with integral carbon block and sediment...

UF
Pentair logo

Product profile

X-Flow-B-0125

The X-Flow-B-0125 is an advanced tubular ultrafiltration membrane element for industrial food and non-food applications.

UF
Pentair logo

Product profile

X-Flow-Compact-1-2

The Pentair X-Flow Compact 1.2 is an ultrafiltration membrane element designed for effluent treatment and membrane bioreactor applications.

UF
Pentair logo

Product profile

X-Flow-Compact-1-6 -5-2MM

This X-Flow-Compact-1-6 -5-2MM is a hydrophilic tubular polyvinylidene fluoride ultrafiltration membrane element designed for large-scale water purification with good...

UF
Pentair logo

Product profile

X-Flow-Compact-4-0G

This Pentair X-Flow-Compact-4-0G is an ultrafiltration membrane element designed for effluent treatment and membrane bioreactor applications.

UF
Pentair logo

Product profile

X-Flow-Compact-5-1G-5-2MM

This X-Flow-Compact-5-1G-5-2MM is an ultrafiltration membrane element designed for large-scale water purification with excellent anti-fouling properties and...

UF
Pentair logo

Product profile

X-Flow-Compact-22V

The Pentair X-Flow Compact 22V is an 8-inch ultrafiltration membrane element designed for various water purification applications including pre-treatment, wastewater...

UF
Pentair logo

Product profile

X-Flow-Compact-27G-Helix

The Pentair X-Flow Compact 27G Helix is an ultrafiltration membrane element designed for effluent treatment, membrane bioreactors, and large-scale water purification.

UF
Pentair logo

Product profile

X-Flow-Compact-27G

This is a Pentair X-Flow Compact 27G ultrafiltration membrane element with a hydrophilic polyvinylidene fluoride membrane on a polyester/polyolefine carrier.

UF
Pentair logo

Product profile

X-Flow-Compact-27-Helix

The Pentair X-Flow Compact 27 Helix is an 8-inch ultrafiltration membrane module designed for effluent treatment and membrane bioreactor applications.

UF
Pentair logo

Product profile

X-Flow-Compact-27

This is a Pentair X-Flow-Compact-27 ultrafiltration membrane element with a mean pore size of 30 nm, suitable for effluent treatment and membrane bioreactor applications.

UF
Pentair logo

Product profile

X-Flow-Compact-33G-Helix

The X-Flow-Compact-33G-Helix is an ultrafiltration membrane element designed for large-scale water purification processes.

UF
Pentair logo

Product profile

X-Flow-Compact-33G

This is a Pentair X-Flow Compact 33G tubular ultrafiltration membrane module with a 33 m² membrane area.

UF
Pentair logo

Product profile

X-Flow-Compact-33-Helix

The Pentair X-Flow Compact 33 Helix is an 8-inch ultrafiltration membrane element with a Helix structure designed for high performance and reduced fouling in various...

UF
Pentair logo

Product profile

X-Flow-Compact-33

The X-Flow Compact 33 is an ultrafiltration membrane element for water purification, with applications in pre-treatment, wastewater treatment, and drinking water...

UF
Pentair logo

Product profile

X-Flow-Compact-33V-Helix

The X-Flow-Compact-33V-Helix is an 8-inch ultrafiltration membrane element with a hydrophilic tubular polyvinylidene fluoride membrane and a Helix surface structure for...

UF
Pentair logo

Product profile

X-Flow-Compact-33V

This Pentair X-Flow Compact 33V is an 8-inch ultrafiltration membrane element with a 30 nm mean pore size and PVDF membrane material.

UF
Pentair logo

Product profile

X-Flow-Compact-75G-Helix

This Pentair X-Flow Compact 75G Helix is an ultrafiltration membrane element with a 75 m² membrane area, featuring a hydrophilic polyvinylidene fluoride membrane with a...

NF
Pentair logo

Product profile

X-Flow-Compact-75G

This membrane is suitable for: Pre-treatment RO and NF、Surface water、Drinking and process water production、Recovery of sandfilter backwash water、Effluent...

NF
Pentair logo

Product profile

X-Flow-Compact-75G-non-coded

This Pentair X-Flow Compact 75G non-coded membrane element features a hydrophilic polyvinylidene fluoride tubular membrane with a 30 nm pore size, suitable for various...

UF
Pentair logo

Product profile

X-Flow-F-0285

This X-Flow-F-0285 is a classic ultrafiltration membrane element featuring a hydrophilic tubular polyvinylidene fluoride membrane for industrial food and non-food...

UF
Pentair logo

Product profile

X-Flow-HFS60

The Pentair X-Flow HFS 60 is a tight ultrafiltration membrane element designed for colloidal silica removal from surface water.

NF
Pentair logo

Product profile

X-Flow-HFW1000

This is an 8-inch PVC housing X-Flow HFW 1000 nanofiltration membrane element designed for process and potable water production with minimal salt retention.

UF
Pentair logo

Product profile

X-Flow-R21-0-9UFC

The X-Flow R21 0.9UFC is an ultrafiltration module made from a PES/PVP blend, suitable for process water production and featuring a nominal pore size of 20 nm.

UF
Pentair logo

Product profile

X-Flow-R-21-HFS

This Pentair X-Flow R-21 HFS is an ultrafiltration membrane module used for producing process water from surface water or WWTP effluent.

Pressure vessel brands
Pentair logo

Product profile

X-Flow-R-100-MF

This Pentair X-Flow R-100 MF is a microfiltration membrane element designed for filtering aqueous solutions and beverages in crossflow mode.

UF
Pentair logo

Product profile

X-Flow-RX300-0-9UFC

The X-flow RX-300 0.9UFC is an ultrafiltration pilot module for producing process and potable water from surface water, potable water, and WWTP effluent.

UF
Pentair logo

Product profile

X-Flow-RX300-1-5UFC

The X-Flow-RX300-1-5UFC is an ultrafiltration pilot module for process and potable water production, featuring PES/PVP membrane material within a PSF housing.

UF
Pentair logo

Product profile

X-Flow-RX300-09UFC

This Pentair X-Flow-RX300-09UFC is an ultrafiltration pilot module designed for process and potable water production.

Pressure vessel brands
Pentair logo

Product profile

X-Flow-S-14

The X-Flow S-14 is a microfiltration membrane module designed for beer clarification using a feed and bleed crossflow operation with backwash and CIP.

UF
Pentair logo

Product profile

X-Flow-S-0325

The X-Flow S 0325 is a tubular polysulfone ultrafiltration membrane for industrial food and non-food applications.

UF
Pentair logo

Product profile

X-Flow-Seaflex-64

The X-Flow-Seaflex-64 is an ultrafiltration membrane module designed for seawater reverse osmosis pre-treatment.

UF
Pentair logo

Product profile

X-Flow-Seaguard-40

The X-Flow Seaguard 40 is an ultrafiltration membrane element designed for seawater reverse osmosis pre-treatment.

UF
Pentair logo

Product profile

X-Flow-Seaguard-55

The Pentair X-Flow Seaguard 55 is an ultrafiltration membrane element designed for pretreatment in seawater reverse osmosis systems.

UF
Pentair logo

Product profile

X-Flow-Seaguard-64

This Pentair X-Flow Seaguard 64 is an ultrafiltration membrane element designed for pretreatment in seawater reverse osmosis applications.

UF
Pentair logo

Product profile

X-Flow-Xiga-40

The Xiga 40 is an ultrafiltration membrane element designed for process and potable water filtration in dead-end operation.

UF
Pentair logo

Product profile

X-Flow-Xiga-55

The Pentair X-Flow XIGA 55 is an Ultrafiltration (UF) membrane element designed for process and potable water filtration, offering 55 m² of surface area.

UF
Pentair logo

Product profile

X-Flow-Xiga-64

This Pentair X-Flow Xiga 64 is an ultrafiltration membrane element with a nominal pore size of 20 nm, designed for process and potable water filtration.

RO
Pentair logo

Product profile

RO-2500 RO Drinking water system

The Pentair RO 2500 is a reverse osmosis membrane element designed for drinking water applications.

RO
Pentair logo

Product profile

RO-2600 RO Drinking water system

The Pentair RO-2600 is a reverse osmosis membrane element designed for drinking water applications.

Pentair RO Membranes RO Membranes | Models & Datasheets | AquaChain Guide